应用化学 ›› 2015, Vol. 32 ›› Issue (4): 379-385.DOI: 10.11944/j.issn.1000-0518.2015.04.140253

• 研究论文 • 上一篇    下一篇

主链含N-烷基咔唑环结构聚芳醚酮的性能表征

王菲菲a, b, 王志鹏a, b, 王红华a, 周光远a*   

  1. a中国科学院长春应用化学研究所 中科院生态环境高分子材料实验室 长春 130022
    b中国科学院大学 北京 100049
  • 收稿日期:2014-07-21 修回日期:2014-09-15 出版日期:2015-04-10 发布日期:2015-04-10
  • 通讯作者: 周光远,研究员; Tel/Fax:0431-85262204; E-mail:gyzhou@ciac.ac.cn; 研究方向:高性能聚芳醚酮树脂、聚烯烃、生物聚酯
  • 基金资助:
    吉林省科技厅发展项目(20130204029GX)

Properties of Poly(arylene ether ketone)s Containing N-Alkylcarbazole in Main Chains

WANG Feifeia, b, WANG Zhipenga, b, WANG Honghuaa, ZHOU Guangyuana, *   

  1. aKey Laboratory of Polymer Ecomaterials,Changchun Institute of Applied Chemistry,Chinese Academy of Science,Changchun 130022,China
    bUniversity of Chinese Academy of Science,Beijing 100049,China
  • Received:2014-07-21 Revised:2014-09-15 Published:2015-04-10 Online:2015-04-10
  • Contact: Corresponding author:ZHOU Guangyuan, professor; Tel/Fax:0431-85262204; E-mail:gyzhou@ciac.ac.cn; Research interests:poly(arylene ether ketone)s with high performance, polyolefin, biodegradable polyesters
  • Supported by:

    Supported by Jilin Province Science and Technology Development Program(No.20130204029GX)

摘要:

对含N-烷基咔唑环结构的聚芳醚酮(PPCzE、PPCzB和PPCzH)进行基本物理性能方面的表征,并与商业化酚酞基聚芳醚酮(PEK-C)进行比较。 咔唑环结构的引入使聚合物在345 nm附近有强紫外光吸收并表现出发蓝光能力。 由于疏水性烷基侧链的存在,聚合物薄膜的水接触角(87°~103°)大于PEK-C(76°),但同时烷基侧链所引起的聚合物链间距的增大导致聚合物的吸水率(0.65%~0.86%)高于PEK-C(0.56%)。 此外,聚合物表现出较好的尺寸稳定性(平均线膨胀系数6.4×10-5-1)和电绝缘性能(体积电阻率1016 Ω·cm)。 聚合物的拉伸模量在1.9~2.0 GPa之间,拉伸强度在72.5~75.0 MPa之间以及断裂伸长率在6.5%~7.2%之间。 高温条件下(≤225 ℃),PPCzE仍具有良好的拉伸性能。

 

关键词: 聚芳醚酮, 咔唑, 侧链烷基, 荧光, 接触角, 拉伸性能

Abstract:

Several basic physical properties of poly(arylene ether ketone)s containing N-alkylcarbazole(PPCzE, PPCzB and PPCzH) were studied in comparison with the corresponding analog, commercialized phenolphthalein poly(ether ketone)(PEK-C). Strong UV absorption and blue light emission ability are exhibited by these polymers due to the introduction of carbazole structure. The water contact angle of polymers(87°~103°) is greater than that of PEK-C(76°), because of the hydrophobic nature of alkyl groups. While at the same time, these polymers have higher water uptake capabilities than PEK-C which is probably due to their larger chain distance. In addition, these polymers exhibit good dimensional stability(linear thermal expansion coefficient 6.4×10-5-1) and electrical insulating(volume resistivity 1016 Ω·cm) property. Young's modulus, tensile strength and elongation at break of these polymers are in the range of 1.9~2.0 GPa, 72.5~75.0 MP and 6.5%~7.2%, respectively. Dynamic mechanical analysis shows that PPCzE remains good tensile property at the temperature up to 225 ℃.

Key words: poly(arylene ether ketone), carbazole, side alkyl, fluorescent, water contact angle, tensile property

中图分类号: