中华医学超声杂志

应用化学 ›› 1993, Vol. 0 ›› Issue (1): 89-91.

• 研究简报 • 上一篇    下一篇

渣油裂解催化剂的再生

李荣生1, 张武阳1, 高传夫1, 魏洤2   

  1. 1. 吉林大学化学系 130023 长春;
    2. 吉林大学测试中心 长春
  • 收稿日期:1992-01-14 修回日期:1992-09-25 出版日期:1993-02-10 发布日期:1993-02-10

REGENERATION OF CATALYST USED FOR RESIDUAL OIL CRACKING

Li Rongsheng1, Zhang Wuyang1, Gao Chuanfu1, Wei Quan2   

  1. 1. Department of Chemistry, Jilin University, 130023 Changchun;
    2. Testing Center, Jilin University, changchun
  • Received:1992-01-14 Revised:1992-09-25 Published:1993-02-10 Online:1993-02-10

PDF

379

摘要： 在渣油的流化催化裂化(FCC)中,来自原料的重金属(Ni,Fe,V等)连续沉积在催化剂上,使后者的活性和选择性严重下降,积炭量增加。为使这些失效的催化剂再生,从60年代末就开始了脱除沉积金属的研究。所用方法都涉及硫化,氧化等反应,处理时间长,操作繁杂,危害环境。本文进行了以盐酸再生裂解催化剂的探索研究,以开发简便有效的脱金属方法。

关键词: 渣油, 裂解, 催化剂, 再生

Abstract: The hydrochloric acid has been used to reactivate the Ni, Fe-deposited fluid cracking catalyst. The results show that the HCl treatment can partly remove the nickel and the iron deposited on the catalyst and regenerate its activity, increasing the gasoline yield and decreasing the carbon deposit.The hydrothermal stability of the catalyst is not affected by the HCl treatment.

Key words: residual oil, catalytic cracking, regeneration

网站版权 © 应用化学     本网站备案：吉ICP备12000082号