应用化学 ›› 2016, Vol. 33 ›› Issue (10): 1099-1114.DOI: 10.11944/j.issn.1000-0518.2016.10.160238

• 综合评述 • 上一篇    下一篇

钯离子荧光探针的研究进展

李海东,姚起超,樊江莉,杜健军,彭孝军()   

  1. 大连理工大学精细化工国家重点实验室 辽宁 大连 116024
  • 收稿日期:2016-06-06 接受日期:2016-07-14 出版日期:2016-10-08 发布日期:2016-10-08
  • 通讯作者: 彭孝军
  • 基金资助:
    国家自然科学基金资助项目(21136002,21421005)

Research Advance on the Fluorescent Probe of Palladium Ions

LI Haidong,YAO Qichao,FAN Jiangli,DU Jianjun,PENG Xiaojun()   

  1. State Key Laboratory of Fine Chemicals,Dalian University of Technology,Dalian,Liaoning 116024,China
  • Received:2016-06-06 Accepted:2016-07-14 Published:2016-10-08 Online:2016-10-08
  • Contact: PENG Xiaojun
  • Supported by:
    Supported by the National Natural Science Foundation of China(No.21136002, No.21421005)

摘要:

钯是一种重要的贵金属,在制药、燃料电池、电子电气和珠宝等行业得到广泛的应用。 然而,它的大量使用不可避免会造成其在环境中的残留,产生毒害,因此对钯的检测与识别具有重要的意义。 荧光探针具有较高的选择性、较高灵敏度、对设备依赖小、操作简单、检测限低等优点。 本文综述了近年应用于低浓度检测钯离子荧光分子探针的设计方法及作用机制。 按照荧光探针检测钯离子的响应模式,主要分为淬灭型、增强型、比率型3种方式进行评述。 尽管钯离子探针的研究在分子设计上取得了重要进展,但荧光染料与钯离子的响应时间尚且不能人为控制,尤其对于复杂体系中钯离子的检测效果尚待进一步改进。 因此,开发钯离子响应时间短、灵敏度高、专一识别性高并能应用于复杂体系的荧光探针,可能是今后主要发展方向。

关键词: 钯, 荧光探针, 染料, 检测方法, 环境检测, 药物残留, 研究进展, 生物成像

Abstract:

A significant quantity of palladium is widely used in various materials, such as pharmacy, fuel cell, dental alloys and electronics, which inevitably cause its residues in the environment with pernicious effect on the body health. Therefore, it is of great significance to the detection and recognition of palladium. Owing to simple operation, high sensitivity, high sensitivity, low limit of detection, excellent high spatial and temporal resolution and especially nondestructive characteristics, fluorescent technique has been paid special attention. A variety of methods are discussed and introduced, which are applied in the design of fluorescent probes developed to detect the low concentration of palladium as well as mechanism of action in this review. Subsequently, the type of fluorescent probes mainly is classified into three kinds:quenching, turn-on and ratio based on response models. Although the molecular design of fluorescence probes of palladium has made an important progress, the response time of probes towards palladium is still uncontrollable. Additionally, it is not ideal for most fluorescent sensors to the detection of palladium in complex system. Developing rapid, high sensitive and selective fluorescent probes are suggested for future research to the detection of palladium ions in complex bio-system.

Key words: palladium, fluorescent probes, dyes, detection method, environment detection, drug residue, research advance, bio-imaging