Chinese Journal of Applied Chemistry ›› 2017, Vol. 34 ›› Issue (8): 891-898.DOI: 10.11944/j.issn.1000-0518.2017.08.160299

• Full Papers • Previous Articles     Next Articles

Fabrication of Succinic Acid Anhydride Grafted Cellulose Nanofiber Membrane and Its Adsorption of Heavy Metal Ions

CHEN Peizhena*(),LIU Ruilaiab,ZHAO Jinyuna,RAO Ruiyea   

  1. a Fujian Provincial Key laboratory of Eco-Industrial Green Technology,College of Ecological and Resources Engineering,Wuyi University,Wuyishan,Fujian 354300,China
    b Fujian Provincial Key Laboratory of Polymer Materials,College of Material Science and Engineering,Fujian Normal University,Fuzhou 350007,China
  • Received:2016-07-22 Accepted:2016-10-14 Published:2017-07-25 Online:2017-07-26
  • Contact: CHEN Peizhen
  • Supported by:
    Supported by the National Natural Science Foundation of China(No.51406141), JK Project of Fujian Educational Bureau(No 2014052, No.2012055), Natural Science Foundation of Nanping Science and Technology Bureau(No.2011DJ10)

Abstract:

Triacetate cellulose(TCA) porous nanofiber membranes(Cell) with diameter of (110±28) nm were successfully prepared by thermally induced phase separation. Succinic acid anhydride grafted cellulose(Cell-g-SAA) nanofiber membranes were obtained through hydrolyzation and grafting of TCA nanofibers. The Cell and Cell-g-SAA membranes were used for the adsorption of Cu2+ and Pb2+. The adsorption kinetics and thermodynamics were studied and found to fit pseudo-second-order and Langmuir model. Compared with cellulose membranes, the max adsorption capacity of Cell-g-SAA membranes for Cu2+ and Pb2+ increases from 51.73 and 34.29 mg/g to 116.41 and 51.73 mg/g, respectively. The adsorptions of Cu2+ and Pb2+ on the Cell and Cell-g-SAA membranes are more agreeable with monolayer adsorption mode via mainly chemical interactions.

Key words: succinic acid anhydride, grafting, nanofibers, heavy metal, adsorption