锂离子电池用陶瓷聚烯烃复合隔膜

doi:10.3724/SP.J.1095.2014.30445

摘要/Abstract

摘要： 为改善聚烯烃微孔膜的耐热安全性，研究了用于锂离子电池的陶瓷聚烯烃复合隔膜ZrO2/SiO2/PP（聚丙烯）。复合膜具有高度多孔性和良好液体电解液湿润性。由于高的毛细吸附作用，通过吸附液态电解液，膜很易传导锂离子。膜中ZrO2/SiO2的两性特征，将电解液中的酸性HF（氟化氢）消耗掉,而HF作为现在锂离子电池所用电解液中的杂质是不可避免的。复合膜作为隔膜制备的碳/正极材料锂离子电池不仅具有优良的容量保持性、高温安全性，也显示良好的倍率放电性。

关键词: 陶瓷聚烯烃隔膜, 锂离子电池, 离子电导, 循环性能

Abstract: A polyolefin/ceramic composite membrane, ZrO2/SiO2/PP（PP:polypropylene）, was prepared as the separator for Li-ion batteries in order to replace the traditional microporous polyolefin membrane. The polyolefin/ceramic composite membrane has high porosity, and can be well wetted by the liquid electrolyte. The ion conductivity of membrane is easily achieved by absorbing the liquid electrolyte due to the high capillary effect. The amphoteric character of ZrO2/SiO2 can scavenge acidic hydrogen fluoride, which is inevitably present in the LiPF6-based electrolytes used currently in the Li-ion batteries. With the polyolefin/ceramic composite membrane as a separator, the graphite/cathode cell exhibits good capacity retention. It is also found that the Li-ion cell fabricated in this manner not only has stable capacity retention, better high temperature performance, but also shows good high-rate performance.

Key words: polyolefin/ceramic composite membrane, Li-ion battery, ion conductivity, cycle life

中图分类号:

O646
TM911.1

王洪, 杨驰, 谢文峰, 余刚. 锂离子电池用陶瓷聚烯烃复合隔膜[J]. 应用化学, DOI: 10.3724/SP.J.1095.2014.30445.

WANG Hong1*, YANG Chi1, XIE Wenfeng2, YU Gang3. A Polyolefin/Ceramic Composite Membrane for Lithium Ion Batteries[J]. Chinese Journal of Applied Chemistry, DOI: 10.3724/SP.J.1095.2014.30445.

参考文献

[1] Aihara Y,Kodama M ,Nakahara K. Electrochemical Characteristics of a Carbon Electrode with Gel Polymer Electrolyte for Lithium-ion Polymer Batteries[J]. J Power Sources,1997,65:143-148.

[2] Kennedy B,Patterson D,Camilleri S. Use of Lithium-ion Batteries in Electric Vehicles[J]. J Power Sources,2000,90:156-162.

[3] Izuchi S,Ochiai S,Takeuchi K.Solid Polymer Electrolytes for Lithium Cells[J]. J Power Sources,1997，68(1):37-42.

[4] Wang H,Yoshio M. Carbon-coated Natural Graphite Prepared by Thermal Vapor Decomposition Process, a Candidate Anode Material for Lithium-ion Battery[J]. J Power Sources,2001,93:123-129.

[5] Guo K K,Pan Q M,Fang S B. Poly(acrylonitrile) Encapsulated Graphite as Anode Materials for Lithium Ion Batteries[J]. J Power Sources,2002,111:350-356.

[6] Wu Y P,Rahm E,Holze R. Carbon Anode Materials for Lithium Ion Batteries[J]. J Power Sources,2003,114:228-236.

[7] Zaghib K,Brochua F,Guerfia A,et al. Effect of Particle Size on Lithium Intercalation Rates in Natural Graphite[J]. J Power Sources,2001,103:140-146.

[8] Padhi A K,Naanjundaswamy K S,Masquelier C,et al. Phospho-olivines as Positive Eclectrode Materials for Rechargeable Lithium Batteries[J]. J Electrochem Soc,1997,144(4):1188-1194.

[9] Padhi A K,Naanjundaswamy K S,Masquelier C,et al. Efect of Structure on the Fe3+/Fe2+ Redox Couple in Iron Phosphate[J]. J Electrochem Soc,1997,144(5):1609-1616.

[10] DAI Xiaoyan,PAN Chunyue,CAO Meng,et al. TiO2/(PEO)8LiClO4 Composite Polymer Electrolyte Prepared by in-situ Methode[J]. Acta Mater Compos Sin，2006,23(5):75-78(in Chinese).

戴潇燕，潘春跃，巢猛,等. 原位复合法制备TiO2/(PEO)8LiClO4聚合物电解质[J]. 复合材料学报，2006,23(5):75-78.

[11] QIU Weili,YANG Qinghe,MA Xiaohua,et al. Novel Preparation and Properties of Nanocomposite Polymer Electrolyte[J]. Acta Mater Compos Sin，2005,22(2):16-20(in Chinese).

邱玮丽，杨清河，马晓华，等. 纳米复合聚合物电解质的新型制备方法及其性能[J]. 复合材料学报，2005,22(2):16-20.

[12] WANG Yanjie,PANG Mingjie,YANG Guangyi,et al. Conductivity Studies on a New Composite Polymer Electrolyte (PEO)-LiClO4-Li1.3Al0.3Ti1.7(PO4)3[J]. Acta Mater Compos Sin,2005,22(1):85-91(in Chinese).

王严杰，庞明杰，杨光义，等. (PEO)-LiClO4-Li1.3Al0.3Ti1.7(PO4)3复合聚合物电解质电导率[J]. 复合材料学报，2005,22(1):85-91.

[13] Brandrup J,Immergut E H. Polymer Handbook[M]. Third Ed. JohnWiley & Sons,NY,1989.

[14] Chung Y S,Yoo S H. Enhancement of Meltdown Temperature of the Polyethylene Lithium Ion Battery Separator via Surface Coating with Polymers Having High Thermal Resistance[J]. Ind Eng Chem Res,2009,48(9):4346.

[15] Yoo S H ,Kim C K. Enhancement of the Melt Down Temperature of a Lithium Ion Battery Separator via a Nano Composite Coating[J]. Ind Eng Chem Res,2009,48(22):9936.

[16] Moon S. The Effect of Polymer Blending and Extension Conditions on the Properties of Separator Prepared by Wet Process for Li Ion Secondary Battery[J]. Polym Korea,2002,26(1):45.

[17] Xiao Q,Li Z,Gao D,et al. A Novel Sandwiched Membrane as Polymer Electrolyte for Application in Lithium Ion Battery[J]. J Membr Sci,2009,326(2):260.

[18] Kritzer P. Nonwoven Support Material for Improved Separators in Li Polymer Batteries[J]. J Power Sources,2006,161(2):1335.