甲烷动态反应-电感耦合等离子体质谱标准加入测定高纯钛中痕量铁

doi:10.19894/j.issn.1000-0518.210024

摘要/Abstract

摘要： 建立了电感耦合等离子体质谱(ICP-MS)快速测定高纯钛中痕量铁的方法。采用氢氟酸和硝酸溶解高纯钛样品,稀释、定容后直接进入ICP-MS检测;采用标准加入法消除基体效应,避免了离子交换、热水解沉淀等去除基体复杂的样品处理方式;以甲烷(CH₄)为反应气,在实际样品中优化确定了动态反应池的最佳工作条件,CH₄流量为0.7 L/min,低截取质量参数(RPq)为0.55,高截取质量参数(RPa)为“0”,有效消除了ArO⁺(m/z=56)对⁵⁶Fe⁺的干扰。在确定的检测条件下,绘制了一高纯钛样品中的标准加入工作曲线,线性方程为y=2745.53x+1708.19,相关系数r²为0.9999,此曲线可转换为“外标法”的校准曲线,线性方程为y=2745.53x+136.19,其它样品可在此曲线下检测,无需再进行标准加入操作,不会降低检测效率;方法的检出限和测定下限分别为0.029和0.097 μg/g,精密度(RSD,n=11)小于7%,回收率为97.5%~106.0%。对3个实际高纯钛样品中痕量铁进行了测定,含量分别为0.53、0.96和4.74 μg/g,测定过程及结果均表明本方法适用于高纯钛中痕量铁的快速准确测定。

关键词: 电感耦合等离子体质谱, 高纯钛, 铁, 标准加入, 动态反应, 甲烷

Abstract: A method for rapid determination of trace iron in high purity titanium by inductively coupled plasma mass spectrometry (ICP-MS) was developed. The high purity titanium samples are dissolved by hydrofluoric acid and nitric acid and directly determined by ICP-MS after being diluted to a fixed volume. The matrix effect is eliminated by a standard addition method, which avoids ion exchange, thermal hydrolysis precipitation or other complicated sample treatment methods. Taking methane (CH₄) as the reaction gas, the optimum working conditions of the dynamic reaction are optimized for the real sample. When the flow rate of CH₄ is 0.7 L/min, the R_pq is 0.55 and the R_pa is “0”, the interference of ArO⁺ (m/z=56) to ⁵⁶Fe⁺ is effectively eliminated. The standard addition curve of a high purity titanium sample is drawn under the determined testing conditions. The linear equation is y= 2745.53x+1708.19, and the correlation coefficient is 0.9999. The curve can be transformed into the calibration curve of “external standard method” and the linear equation is y=2745.53x+136.19. The iron content in other samples can be detected under this curve, no standard addition operation is needed in every sample, and the detection efficiency is not reduced. The detection limit and the quantification limit of method are 0.029 and 0.097 μg/g, respectively, the precision (RSD, n=11) is less than 7% , and the recovery is 97.5%~106.0%. The trace iron in three samples of the high purity titanium is determined, the results are 0.53, 0.96 and 4.74 μg/g, respectively. The determination process and results show that the method is suitable for rapid and accurate determination of trace iron in high purity titanium.

Key words: Inductively coupled plasma, High purity titanium, Iron, Standard addition, Dynamic reaction, Methane

中图分类号:

O657.6

罗策, 颜燕, 李剑, 刘婷, 白焕焕, 卢凡, 冯婧. 甲烷动态反应-电感耦合等离子体质谱标准加入测定高纯钛中痕量铁[J]. 应用化学, 2021, 38(7): 874-880.

LUO Ce, YAN Yan, LI Jian, LIU Ting, BAI Huan-Huan, LU Fan, FENG Jing. Determination of Trace Iron in High Purity Titanium by Methane Dynamic Reaction-Inductively Coupled Plasma Mass Spectrometry Standard Addition Method[J]. Chinese Journal of Applied Chemistry, 2021, 38(7): 874-880.

参考文献

[1] 石英江. 高纯钛的生产与应用[J]. 上海金属(有色分册), 1993, 14(6): 26-33.
SHI Y J. The production and application of highly pure titanium[J]. Shanghai Met (Nonferrous Fascicule), 1993, 14(6): 26-33.
[2] 莫畏. 钛[M]. 北京: 冶金工业出版社, 2008: 4, 255.
MO W. Titanium[M]. Beijing: Metallurgical Industry Press, 2008: 4, 255.
[3] 刘正红, 陈志强. 高纯钛的应用及其生产方法[J]. 稀有金属快报, 2008, 27(2): 1-8.
LIU Z H, CHEN Z Q. Application of high purity titanium and methods to produce it[J]. Rare Met Lett, 2008, 27(2): 1-8.
[4] 刘克敌, 张凌峰, 熊毅, 等. 纯度对钛力学性能与组织的影响[J]. 塑性工程学报, 2018, 25(4): 194-198.
LIU K D, ZHANG L F, XIONG Y, et al. Influence of purity on mechanical properties and microstructure of titanium[J]. J Plast Eng, 2018, 25(4): 194-198.
[5] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 海绵钛: GB/T 2524-2019[S]. 北京: 中国标准出版社, 2019.
General administration of quality supervision, inspection and quarantine of the People′s Republic of China, Standardization administration of the People′s Republic of China. Titanium sponge: GB/T 2524-2019[S]. Beijing: Standard Press of China, 2019.
[6] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 钛及钛合金牌号和化学成分: GB/T 3620.1-2016[S]. 北京: 中国标准出版社, 2017.
General administration of quality supervision, inspection and quarantine of the People′s Republic of China, Standardization administration of the People′s Republic of China. Designation and composition of titanium and titanium alloys: GB/T 3620.1-2016[S]. Beijing: Standard press of China, 2017.
[7] 李娜, 刘英, 李艳芬, 等. ICP-MS法测定高纯钛中痕量元素[J]. 分析试验室, 2011, 30(12): 22-25.
LI N, LIU Y, LI Y F, et al. Determination of trace amounts of elements in high purity titanium by ICP-MS[J]. Chinese J Anal Lab, 2011, 30(12): 22-25.
[8] 李娜, 刘冰心, 张丽, 等. 热水解沉淀法分离基体钛-ICP-MS 法测定高纯钛中痕量元素[J]. 分析试验室, 2012, 31(12): 9-12.
LI N, LIU B X, ZHANG L, et al. Separaton of titanium matrix by pyrohydrolysis-deposition method-determination of trace amounts of elements in high purity titanium by ICP-MS[J]. Chinese J Anal Lab, 2012, 31(12): 9-12.
[9] 中华人民共和国工业和信息化部. 高纯钛化学分析方法痕量杂质元素的测定电感耦合等离子体质谱法: YS/T 892-2013[S]. 北京: 冶金工业出版社, 2013.
Ministry of industry and information technology of the People′s Republic of China. Methods for chemical analysis of high purity titanium-determination of trace impurity element content-inductively coupled plasma mass spectrometry: YS/T 892-2013[S]. Beijing: Metallurgical Industry Press, 2013.
[10] 黎蓉, 李娜, 童坚, 等. 离子交换色谱一电感耦合等离子体质谱法测定高纯钛中痕量杂质元素[J]. 分析化学, 2009, 37(5): 749-752.
LI R, LI N, TONG J, et al. Determination of trace amounts of elements in high purity titanium by ion-exchange chromatography and inductively coupled plasma mass spectrometry[J]. Chinese J Anal Chem, 2018, 46(4): 570-577.
[11] 王小如. 电感耦合等离子体质谱应用实例[M]. 北京: 化学工业出版社, 2005: 268.
WANG X R. Application of inductively coupled plasma mass spectrometry[M]. Beijing: Chemical Industry Press, 2005: 268.
[12] 陈文, 樊小伟, 郭才女, 等. 电感耦合等离子体串联质谱法测定高纯稀土中铁的含量[J]. 分析化学, 2019, 47(3): 403-409.
CHEN W, FAN X W, GUO C N, et al. Determination of iron content in high purity rare earth by inductively coupled plasma-tandem mass spectrometry[J]. Chinese J Anal Chem, 2019, 47(3): 403-409.
[13] ZHU Y B. Determination of rare earth elements in seawater samples by inductively coupled plasma tandem quadrupole mass spectrometry after coprecipitation with magnesium hydroxide[J]. Talanta, 2020, 209(3): 1-8.
[14] 任传婷, 方卫, 冯璐, 等. ICP-MS法测定纯铑中16个杂质元素[J]. 贵金属, 2017, 38(3): 66-71.
REN C T, FANG W, FENG L, et al. Determination of 16 impurities in pure rhodium by ICP-MS[J]. Precious Metals, 2017, 38(3): 66-71.
[15] 李秋莹, 甘建壮, 李立新, 等. ICP-MS法测定高纯钯中18个痕量杂质元素[J]. 贵金属, 2017, 38(4): 49-55.
LI Q Y, GAN J Z, LI L X, et al. Determination of 18 trace impurities in high purity palladium by ICP-MS[J]. Precious Met, 2017, 38(4): 49-55.
[16] 蒋慧, 雷宁生, 黎林, 等. 动态反应池电感耦合等离子体质谱法同时测定尿液中17种元素[J]. 理化检验-化学分册, 2017, 53(11): 1286-1290.
JIANG H,LEI N S, LI L, et al. Simultaneous ICP-MS determination of 17 elements in urine with dynamic reaction cell[J]. Phys Test Chem Anal Part B: Chem Anal, 2017, 53(11): 1286-1290.
[17] 罗策, 刘婷, 白焕焕, 等. 电感耦合等离子体原子发射光谱法测定Ti80钛合金中铝铌锆钼铁的酸体系溶解条件探讨[J]. 冶金分析, 2016, 36(10): 69-75.
LUO C, LIU T, BAI H H, et al. Discussion on acid dissolution conditions for the determination of aluminum, niobium, zirconium, molybdenum and iron in Ti80 titanium alloy by inductively coupled plasma atomic emission spectrometry[J]. Metall Anal, 2016, 36(10): 69-75.
[18] 龚子珊, 蒋学慧, 杨雨, 等. 电感耦合等离子体质谱中的基质效应[J]. 分析测试学报, 2029, 39(8): 1058-1064.
GONG Z S, JIANG X H, YANG Y, et al. Matrix effects in inductively coupled plasma mass spectrometry[J]. J Instrum Anal, 2020, 39(8): 1058-1064.
[19] 杏朝刚, 袁京群, 李世敏. 微波消解-动态反应池电感耦合等离子体质谱测定农产品中的痕量硒[J]. 浙江农业学报, 2018, 30(8): 1414-1419.
XING C G, YUAN J Q, LI S M. Determination of trace selenium in agricultural products with microwave digestion-dynamic reaction cell inductively coupled plasma mass spectrometry[J]. J Zhejiang Agric Univ, 2018, 30(8): 1414-1419.
[20] NIXON D E, NEUBAUER K R, ECKDAHL S J, et al. Comparison of tunable bandpass reaction cell inductively coupled plasma mass spectrometry with conventional inductively coupled plasma mass spectrometry for the determination of heavy metals in whole blood and urine[J]. Spectrochim Acta, Part B, 2004, 59(7): 1377-1387.