应用化学 ›› 2010, Vol. 27 ›› Issue (11): 1282-1285.DOI: 10.3724/SP.J.1095.2010.00015

• 研究论文 • 上一篇    下一篇

回收灯用钨丝在H2O2催化氧化环己酮合成己二酸中的应用

陈丹云*,周慧,杨晓珂,何建英   

  1. (河南大学化学化工学院精细化学与工程研究所 开封 475004)
  • 收稿日期:2010-01-07 修回日期:2010-03-10 出版日期:2010-11-10 发布日期:2010-11-10
  • 通讯作者: 陈丹云,女,副教授; E-mail:1207@henu.edu.cn; 研究方向:催化剂研制及精细化学品的催化合成
  • 基金资助:
    河南省教育厅(2008A150002)和河南省科技厅(092102210171)资助项目

Application of Recycled Lamp Tungsten Filament as Catalyst in the Oxidation of Cyclohexanone to Adipic Acid by H2O2

CHEN Dan-Yun*, ZHOU Hui, YANG Xiao-Ke, HE Jian-Ying   

  1. (Institute of Fine Chemistry and Engineering,Henan University,Kaifeng 475004)
  • Received:2010-01-07 Revised:2010-03-10 Published:2010-11-10 Online:2010-11-10

摘要:

以回收灯用钨丝为催化剂前驱物,30%H2O2为氧源,催化氧化环己酮合成了己二酸,反应体系中无须使用有机溶剂、酸性助剂和相转移剂。 IR和TG分析表明,钨丝与H2O2反应生成的新生态过氧钨酸是催化活性成分,合成己二酸后转化为钨酸。 钨丝为催化剂前驱物合成己二酸适宜反应条件为:100 mmol环己酮,50 mL 30%H2O2,钨丝的摩尔用量为环己酮摩尔数的1.5%,回流反应6 h,己二酸收率63.7%。 比相同反应条件下用钨酸和WO3为催化剂的收率高10%~18%。

关键词: 回收灯用钨丝, 新生态过氧钨酸, 催化氧化, 己二酸, 环己酮

Abstract:

Using recycled lamp tungsten filament as the precursor of catalyst, adipic acid was synthesized from the oxidation of cyclohexanone by 30%H2O2 without the presence of any organic solvent, acidic additives and phase transfer agents. The IR and TG results indicate that nascent peroxotungstic acid is the active catalytic component obtained from the oxidation of recycled lamp tungsten filament by H2O2. It converts to tungstic acid finally. After 6 h refluxing, a 63.7% yield of adipic acid could be attained using the above catalyst in optimized reaction system consisting of 100 mmol of cyclohexanone in 50 mL 30%H2O2, and with 1.5% molar fraction of catalyst in cyclohexanone. Under identical conditions the yield is 10%~18% higher than those from using tungstic acid or WO3 as the catalyst.

Key words: recycled tungsten filament for lamp, new-ecology peroxotungstic acid, catalyzed oxidation, adipic acid, cyclohexanone

中图分类号: