中华医学超声杂志

应用化学

• 封面图片 •    下一篇

萘二磺酸钠转化产物催化合成双酚S及精制

张天永ab,杨玉秋ab,李彬ab*(),王智超ab,张国玲cd,陈松a,安静cd   

  1. a天津大学化工学院 天津市应用催化科学与工程重点实验室 天津 300354
    b天津市功能精细化学品技术工程中心 天津 300354
    c科迈化工股份有限公司 天津 300270
    d天津市绿色橡胶助剂企业重点实验室 天津 300270
  • 收稿日期:2016-08-19 出版日期:2017-05-02

Catalytic Synthesis and Purification of Bisphenol S by the Products of Converted Disodium Naphthalenedisulfonate

ZHANG Tianyongab,YANG Yuqiuab,LI Binab*(),WANG Zhichaoab,ZHANG Guolingcd,CHEN Songa,AN Jingcd   

  1. aTianjin Key Laboratory of Applied Catalysis Science and Engineering,School of Chemical Engineering and Technology,Tianjin University,Tianjin 300354,China
    bTianjin Engineering Research Center of Functional Fine Chemicals,Tianjin 300354,China
    cKemai Chemical Co., Ltd.,Tianjin 300270,China
    dTianjin Enterprises Key Laboratory of Green Rubber Auxiliary,Tianjin 300270,China
  • Received:2016-08-19 Published:2017-05-02
  • Supported by:
    国家自然科学基金(21276187);天津市科技创新平台计划(14TXGCCX00017);天津市自然科学基金(16JCYBJC20800)资助

摘要：

采用阳离子交换树脂将2,6-萘二磺酸钠转化为2,6-萘二磺酸并用于双酚S(BPS)合成,研究了转化时间、温度、树脂用量等条件对反应的影响。 较优的转化条件为:将2,6-萘二磺酸钠完全溶解后,加入用量为理论值37倍的001×7型强酸性聚苯乙烯系阳离子交换树脂,常温转化24 h,用转化产物催化合成的BPS粗品收率为93.5%,BPS质量分数为92.3%。 采用水-吸附剂体系进行精制,不添加有机试剂,BPS产品质量分数高,操作简单,易于工业化。 较优的精制条件为:7 g BPS粗品加热溶于300 g去离子水后,加入0.5 g海泡石、0.2 g活性炭,回流搅拌1 h,过滤后潮品再加热溶于180 g去离子水中,加入0.3 g海泡石,回流搅拌1 h,得白色产品,BPS质量分数可达99.7%。 精制水可循环套用且可提高BPS产品收率至82.9%。

关键词: 双酚S, 萘二磺酸钠, 阳离子交换树脂, 精制, 吸附剂

Abstract:

Transformation of disodium 2,6-naphthalenedisulfonate into 2,6-naphthalenedisulfonic acid was catalyzed by cationic exchange resin and the 2,6-naphthalenedisulfonic acid was used to catalyze the synthesis of bisphenol S(BPS). The effects of the reaction time, temperature and the amount of resin were investigated. The optimized exchange process was applied as follows:After disodium 2,6-naphthalenedisulfonate was completely dissolved, 37 times of 001×7 strong acidic polystyrene type cationic exchange resin were added into the system. The converted products were used to catalyze the synthesis of BPS. The yield of crude product BPS reached 93.5% and the mass fraction of BPS was 92.3%. Crude BPS was purified by adsorbent without organic solvent. The mass fraction of the product obtained by the process is high. The improved process is easy to be operated and industrialized. The improved purification process was applied as follows:Firstly 7 g of crude BPS was dissolved in 300 g hot water. Then 0.5 g sepiolite and 0.2 g active carbon were added under stirring. The wet product was dissolved in 180 g hot water again and another 0.3 g sepiolite was added. After 1 hour of stirring, a white product was obtained and the purity of BPS reached 99.7%. The water could be recycled, resulting in increasing yield of product BPS to 82.9% at the same time.

Key words: bisphenol S, disodium naphthalenedisulfonate, cationic exchange resin, purification, adsorbent

网站版权 © 应用化学     本网站备案：吉ICP备12000082号