应用化学 ›› 2011, Vol. 28 ›› Issue (06): 629-633.DOI: 10.3724/SP.J.1095.2011.00469

• 研究论文 • 上一篇    下一篇

双环戊二烯苯酚树脂的合成新工艺

孙豪健,马艺闻,王元瑞,张龙*   

  1. (长春工业大学化学工程学院,吉林省石化资源与生物质综合利用工程实验室 长春 130012)
  • 收稿日期:2010-08-09 修回日期:2010-10-31 出版日期:2011-06-10 发布日期:2011-06-10
  • 通讯作者: 张龙,教授; Tel/Fax:0431-85716785; E-mail:zhanglongzhl@163.com; 研究方向:精细有机合成
  • 基金资助:
    吉林省科技发展计划项目(20070509)

New Synthetic Process of Dicyclopentadiene Phenol Resin

SUN Haojian, MA Yiwen, WANG Yuanrui, ZHANG Long*   

  1. (Jilin Provincial Engineering Laboratory for the Complex Utilization of Biomass and Petroresources,
    School of Chemical Engineering,Changchun University of Technology,Changchun 130012)
  • Received:2010-08-09 Revised:2010-10-31 Published:2011-06-10 Online:2011-06-10

摘要:

以双环戊二烯(DCPD)和苯酚为原料,甲磺酸为催化剂,合成了双环戊二烯苯酚树脂。适宜工艺条件:苯酚与DCPD摩尔比为5、反应温度120 ℃、反应时间5 h、催化剂质量分数为1.5%,收率89%。所得的双环戊二烯苯酚树脂(DPR)经催化加氢法在H2气压力1.5 MPa、催化剂Pd/Al2O3用量为原料质量分数的0.5%、反应温度80 ℃条件下对树脂进行脱色处理。 得到浅黄色双环戊二烯苯酚树脂,收率89%,经IR和1H NMR表征分析其为目的产物,产物指标达到国际同类产品的质量标准。

关键词: 双环戊二烯, 苯酚, 脱色, 双环戊二烯苯酚树脂

Abstract:

Dicyclopentadiene phenol resin(DPR) was prepared from dicyclopentadiene and phenol with methane sulfonic acid as the catalyst. The optimum conditions for the synthesis were as follows:n(phenol)/n(DCPD)=5;w(catalyst)=1.5%; temperature=120 ℃; time=5 h; yield=89%. The light yellow dicyclopentadiene phenol resin was obtained by the decolouring of catalytic-hydrogenation. The optimal conditions for the decolorization were as follows:hydrogen pressure=1.5 MPa, w(Pd/Al2O3)=0.5%, temperature=80 ℃, yield=89%. FT-IR and 1H NMR analysis identified the desired product. The product properties reached the international quality standards.

Key words: dicyclopentadiene, Phenol, Decoloration, dicyclopentadiene phenol resin

中图分类号: