应用化学 ›› 2017, Vol. 34 ›› Issue (6): 623-630.DOI: 10.11944/j.issn.1000-0518.2017.06.160381

• 研究论文 • 上一篇    下一篇

含咪唑酮结构聚芳醚砜共聚物的制备与表征

杨玉a,王志鹏bc,王红华bc,周光远b*(),朱晓飞a*()   

  1. a长春工业大学化学与生命科学学院 长春 130012
    b中国科学院长春应用化学研究所,生态环境高分子材料重点实验室 长春 130022
    c常州储能材料与器件研究院 江苏 常州 213002
  • 收稿日期:2016-09-21 接受日期:2016-12-06 出版日期:2017-05-31 发布日期:2017-05-31
  • 通讯作者: 周光远,朱晓飞
  • 基金资助:
    国家高技术研究发展计划项目(863计划)资助(2015AA033901)

Preparation and Characterization of Poly(aryl ether sulfone) Copolymers Containing Imidazolyl Group

YANG Yua,WANG Zhipengbc,WANG Honghuabc,ZHOU Guangyuanb*(),ZHU Xiaofeia*()   

  1. aInstitute of Chemistry and Life Science,Changchun University of Technology,Changchun 130012,China
    bKey Laboratory of Polymer Ecomaterials,Changchun Institute of Applied Chemistry, Chinese Academy of Sciences,Changchun 130022,China
    cChangzhou Institute of Energy Storage Meterials & Devices,Changzhou,Jiangsu 213002,China;
  • Received:2016-09-21 Accepted:2016-12-06 Published:2017-05-31 Online:2017-05-31
  • Contact: ZHOU Guangyuan,ZHU Xiaofei
  • Supported by:
    Supported by National High Technology Research and Development Projects(No.2015AA033901)

摘要:

通过共聚的方法在酚酞聚芳醚砜(PES-C)的主链上引入苯并咪唑酮和5,6-二甲基苯并咪唑酮结构,制备了一系列苯并咪唑酮和5,6-二甲基苯并咪唑酮结构含量不同的高玻璃化转变温度(Tg)聚芳醚砜共聚物。 利用核磁共振谱(NMR)、傅里叶变换红外光谱仪(FTIR)、热重分析仪(TGA)等技术手段表征了三元共聚物的结构和性能。 结果表明,聚芳醚砜共聚物为无定型结构。 聚合物具有优异的热性能,并且均呈现出单一的Tg(Tg>271 ℃);随着苯并咪唑酮和5,6-二甲基苯并咪唑酮的摩尔分数的增加,聚合物Tg呈现规律性升高,分别从270 ℃升高到340和344 ℃。 两种共聚物均能够溶于极性非质子N,N-二甲基甲酰胺(DMF)、N,N-二甲基乙酰胺(DMAc)、二甲基亚砜(DMSO)、N-甲基吡咯烷酮(NMP)及氯仿(CHCl3)等溶剂中。 具有很好的溶解加工性和成膜性,可以进行溶液加工制备韧性的薄膜。

关键词: 聚芳醚砜, 苯并咪唑酮, 酚酞, 共聚物, 无定型

Abstract:

A series of different content of benzimidazolone and 5,6-dimethyl-2-benzimidazolone poly(aryl ether sulfone) copolymers with side groups were synthesized by copolymerization on the basis of poly(aryl ether sulfone) with cardo group(PES-C). The structures and properties of the copolymers were characterized by nuclear magnetic resonance spectroscopy(NMR), Fourier transform infrared spectrometer(FTIR), thermal gravimetric analyzer(TGA) and so on. The resulsts show that poly(aryl ether sulfone) copolymers are amorphous. The copolymers exhibit good heat resistance, and present a single glass transition temperature(Tg>271 ℃), when the mole fraction of benzimidazolone and 5,6-dimethyl-2-benzimidazolone increases, the copolymer glass transition temperature rises, ranging from 270 ℃ to 318 ℃ and 314 ℃, respectively. At the same time, the copolymers have good thermal stability. These copolymers have good solubility in N,N-dimethyl formamide(DMF), N,N-dimethylacetamide(DMAc), dimethyl sulfoxide(DMSO), N-methyl pyrrolidone(NMP) which are the commonly polar aprotic solvents, and trichloromethane(CHCl3). Based on good solution processability and film-forming properties, the toughness thin film can be prepared by solution preparation.

Key words: poly(aryl ether sulfone), benzimidazolone, phenolphthalein, copolymer, amorphous form