中华医学超声杂志

应用化学

• 研究论文 • 上一篇    下一篇

氧化锌催化淀粉/乳酸接枝共聚物的制备与表征

王清岭,胡应模*,边静   

  1. (中国地质大学（北京）材料科学与工程学院 北京 100083)
  • 收稿日期:2011-05-04 修回日期:2011-06-14 出版日期:2012-03-10 发布日期:2012-03-10
  • 通讯作者: 胡应模，教授; Tel:010-82320151; Fax:010-82322974; E-mail:huyingmo@cugb.edu.cn; 研究方向：环境降解高分子材料的开发及利用等
  • 基金资助:
    中央高校基本业务费专项资金(2011PY0171)

Synthesis and Characterization of Starch/Lactic Acid Graft Copolymer Catalyzed with Zinc Oxide

WANG Qingling, HU Yingmo*, BIAN Jing   

  1. (School of Material Science and Engineering,China University of Geosciences,Beijing 100083,China)
  • Received:2011-05-04 Revised:2011-06-14 Published:2012-03-10 Online:2012-03-10
  • Contact: Qingling Wang

PDF

1495

摘要： 采以氧化锌为催化剂，采用原位聚合法制备了淀粉/乳酸接枝共聚物。 由FT-IR、1H NMR、XRD和SEM对接枝产物进行了表征，且讨论了反应温度、淀粉与乳酸质量比、催化剂用量和反应时间对淀粉接枝率的影响，结果表明，当反应温度为95 ℃，淀粉与乳酸质量比为1∶5，催化剂用量为乳酸质量的1.0%，反应时间11 h时，产物的接枝率可达到14.20%。

关键词: 淀粉, 乳酸, 氧化锌, 接枝共聚, 接枝率

Abstract: Starch/lactic acid graft copolymer was prepared with in-stiu graft copolymerization catalyzed by zinc oxide. The graft copolymer was characterized by FT-IR, 1H NMR, XRD and SEM. Effects of the reaction temperature, mass ratio between corn starch and lactic acid, amount of the catalyst and the reaction time on the grafting degree were studied. It was found that the highest grafting degree could reach 14.20% with the mass ratio of corn starch to lactic acid being 5∶1, and the mass fraction of the catalyst being 1.0% of the lactic acid, and the reaction was carried out at 95 ℃ for 11 h.

Key words: starch, lactic acid, zinc oxide, graft copolymerization, grafting degree

中图分类号: 

网站版权 © 应用化学     本网站备案：吉ICP备12000082号