应用化学 ›› 2018, Vol. 35 ›› Issue (8): 963-968.DOI: 10.11944/j.issn.1000-0518.2018.08.180143

• 研究论文 • 上一篇    下一篇

TiO2包覆Co9S8的制备及其电化学储氢性能

韩璐ab,秦伟c*()   

  1. a哈尔滨工业大学化工与化学学院 哈尔滨 150001
    b河北科技师范学院化学工程学院 河北 秦皇岛 066004
    c哈尔滨工业大学材料科学与工程学院 哈尔滨 150001
  • 收稿日期:2018-05-02 接受日期:2018-06-25 出版日期:2018-07-24 发布日期:2018-07-24
  • 通讯作者: 秦伟
  • 基金资助:
    国家自然科学基金项目资助(51572060,51671074)

Preparation and Electrochemical Hydrogen Storage Properties of TiO2 Coated Co9S8

HAN Luab,QIN Weic*()   

  1. aSchool of Chemistry and Chemical Engineering,Harbin Institute of Technology,Harbin 150001,China
    bInstitute of Chemical Engineering,Hebei Normal University of Science and Technology,Qinhuangdao,Hebei 066004,China
    cSchool of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China
  • Received:2018-05-02 Accepted:2018-06-25 Published:2018-07-24 Online:2018-07-24
  • Contact: QIN Wei
  • Supported by:
    Supported by the National Natural Science Foundation of China (No. 51572060, No. 51671074)

摘要:

目前,寻找新型能源成为解决能源和环境问题的关键,氢能以其高效能、无污染等优点成为研究重点。 其中,开发具有高储氢量和优异循环稳定性的新材料是利用氢能的重要研究方向。 近些年,Co9S8凭借其优良的电化学储氢性能和较高的储氢容量成为目前研究热点,但其抗粉化性能仍有待于进一步提高。 本文采用溶胶凝胶法和煅烧法得到了不同质量分数TiO2包覆Co9S8的电极材料,利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)和电化学测试系统分析包覆材料组成与性能,研究不同质量分数的TiO2对材料电化学储氢性能的影响。 结果表明,当TiO2质量分数为3%时,产物的储氢性能和循环稳定性最好,最大储氢容量(质量分数)为2.03%,且经过30次充放电后,其放电容量仍能保持在60%。

关键词: Co9S8, TiO2, 包覆, 电化学储氢

Abstract:

Finding new energy has become the key to solving the energy and environmental problems. Hydrogen became the research focus because of its high energy efficiency and non-pollution. In recent years, Co9S8 is becoming a hot research topic with the excellent electrochemical hydrogen storage properties and high hydrogen storage capacity,but its anti-powering property still needs to be further improved. In this paper, TiO2 with different mass fraction coated Co9S8 electrode materials were obtained by using sol-gel and calcination methods. X-ray diffraction spectra(XRD), scanning electron microscope(SEM) and electrochemical measurement system were used to analyze the composition and hydrogen storage capacity of coating materials. The effects of TiO2 with different mass fractions on the electrochemical hydrogen storage performance were studied. The experimental results show that, when the mass fraction of TiO2 is 3%, the hydrogen storage capacity and cycling stability of the product are disirable. The maximum hydrogen storage capacity of the product is 2.03%(mass fraction), along with a favorable cycling stability of 60% after 30 cycles.

Key words: Co9S8, TiO2, coating, electrochemical hydrogen storage property