应用化学 ›› 2017, Vol. 34 ›› Issue (7): 744-748.DOI: 10.11944/j.issn.1000-0518.2017.07.160418

• 研究论文 • 上一篇    下一篇

氯化聚丙撑碳酸酯增容聚丙撑碳酸酯/秸秆粉复合材料的制备及性能

李陈浩洋a,崔西华b,姜伟b,陈斌a*()   

  1. a沈阳化工大学材料科学与工程学院 沈阳 110142
    b中国科学院长春应用化学研究所,高分子物理与化学国家重点实验室 长春 130022
  • 收稿日期:2016-10-18 接受日期:2016-12-29 出版日期:2017-07-04 发布日期:2017-07-04
  • 通讯作者: 陈斌
  • 基金资助:
    国家自然科学基金(51673195)项目资助

Preparation and Properties of the Poly(propylene carbonate)/Straw Flour Composites Compatibilized with Chlorided Poly(propylene carbonate)

LICHEN Haoyanga,CUI Xihuab,JIANG Weib,CHEN Bina*()   

  1. aSchool of Materials Science and Engineering,Shenyang University of Chemical Technology,Shenyang 110142,China
    bState Key Laboratory of Polymer Physics and Chemistry,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022,China
  • Received:2016-10-18 Accepted:2016-12-29 Published:2017-07-04 Online:2017-07-04
  • Contact: CHEN Bin
  • Supported by:
    Supported by the National Natural Science Foundation of China(No.51673195)

摘要:

聚丙撑碳酸酯(PPC)是一种新型热塑性生物降解材料,但其热性能及力学性能较差,应用受到限制。 以秸秆粉这种农作物副产品作为增强体改性PPC,既可以提高PPC的力学性能同时又可开发利用秸秆资源。 氯化聚丙撑碳酸酯(CPPC)是聚丙撑碳酸酯(PPC)经过氯化得到的,对天然纤维表面具有良好的浸润性和粘结性。 本文以CPPC为增容剂,通过熔融共混法制备了PPC/秸秆粉复合材料。 采用扫描电子显微镜(SEM)、拉伸实验、动态力学性能测试(DMA) 及转矩流变仪对复合材料的结构及性能进行了表征,重点考察了CPPC的添加量对复合材料力学和流变性能的影响。 结果表明,当CPPC质量分数为1.8%时,可使添加质量分数为30%秸秆粉的PPC复合材料拉伸强度提高38%,模量提高30%。 同时,CPPC的引入使复合材料的粘度下降,改善了PPC/秸秆粉复合材料的加工性能。 因此,作为增容剂的CPPC为制备高性能PPC/天然纤维复合材料提供了新的解决办法。

关键词: 聚丙撑碳酸酯, 秸秆, 氯化聚丙撑碳酸酯, 复合材料, 力学性能

Abstract:

Poly(propylene carbonate)(PPC) is a new thermoplastic biodegradable material. However, its poor thermal and mechanical properties prevent its application in many fields. In corporation the straw flour, a by-product of agricultural products, into PPC is expected to enhance the mechanical properties of PPC and at the same time to find a way to make comprehensive use of straw resources. Chlorided poly(propylene carbonate)(CPPC), which was prepared by chlorination of PPC, possesses good wetting and adhering abilities on the surface of nature fibers. In this study, the PPC/straw flour composites compatibilized with CPPC were prepared by melt blending. The composites are characterized by scanning electron microscopy(SEM), tensile test, dynamic mechanical analysis(DMA) and rotational rheometer, focusing on the effect of CPPC contents on the mechanical and rheological properties of the composites. The results indicate that the tensile strength is increased by 38% for the 70/30 mass ratio of PPC to straw flour composites when 1.8%(mass fraction) CPPC is added. Moreover, the viscosity of the composite decreases with the introduction of CPPC and the processing property is improved accordingly. As a consequence, CPPC as compatibilizer provides a new way to prepare high performance PPC/natural fiber composites.

Key words: poly(propylene carbonate), straw, chlorided poly(propylene carbonate), composites, mechanical properties