Progress in Thermosetting Polyimide Resins

doi:10.11944/j.issn.1000-0518.2015.05.140288

Chinese Journal of Applied Chemistry ›› 2015, Vol. 32 ›› Issue (5): 489-497.DOI: 10.11944/j.issn.1000-0518.2015.05.140288

Previous Articles Next Articles

Progress in Thermosetting Polyimide Resins

YAN Jingling^a, MENG Xiangsheng^a, WANG Zhen^{a, *}, WANG Zhimin^{b, *}

^aLaboratory of Polymer Composites Engineering, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
^bShanghai Aero Measurement & Control Technology Research Institute, Aviation Industry Corporation of China, Shanghai 201601, China

Received:2014-08-15 Revised:2014-10-09 Accepted:2014-11-10 Published:2015-05-05 Online:2015-05-05
Contact: WANG Zhen, WANG Zhimin
Supported by:
Supported by the National Natural Science Foundation of China(No.51173178, No.51473157)

Abstract

CLC Number:

YAN Jingling, MENG Xiangsheng, WANG Zhen, WANG Zhimin. Progress in Thermosetting Polyimide Resins[J]. Chinese Journal of Applied Chemistry, 2015, 32(5): 489-497.

References

[1]	CHEN Xiangbao. Handbook of Polymer Matrix Composites[M]. Beijing:Chemical Industry Press, 2004:3-4(in Chinese). 陈祥宝. 聚合物基复合材料手册[M]. 北京:化学工业出版社, 2004:3-4.
[2]	DING Mengxian. Polyimide:Chemistry, Structure-property Relationship, and Materials[M]. Beijing:Science Press, 2012:593-648(in Chinese) 丁孟贤. 聚酰亚胺-化学、结构与性能的关系及材料[M]. 北京:科学出版社, 2012:593-648.
[3]	CHEN Xiangbao, ZHANG Baoyan, XING Liying. Application and Development of Advanced Polymer Matrix Composites[J]. Mater China, 2009, 28:2-12(in Chinese). 陈祥宝, 张宝艳, 邢丽英. 先进树脂基复合材料技术发展及应用现状[J]. 中国材料进展, 2009, 28:2-12.
[4]	YANG Shiyong, FAN Lin, CHEN Jiansheng, et al.Research Development of Polyimide with High Performance[J]. Thermosetting Resin, 2008, 23:32-35(in Chinese). 杨士勇, 范琳, 陈建升, 等. 高性能聚酰亚胺材料的研究进展[J]. 热固性树脂, 2008, 23:32-35.
[5]	Serafini T, Delvigis. P, Lightsey G. Thermally Stable Polyimides from Solutions of Monomeric Reactants[J]. J Appl Polym Sci, 1972, 16(4):905-915.
[6]	Hay J N, Boyle J D, Parker S F, et al.Polymerization of N-Phenylandimide:A Model for the Crosslinking of PMR-15 Polyimides[J]. Polymer, 1989, 30:1032-1040.
[7]	Meador A B, Johnston J C. Elucidation of the Cross-link Structure of Nadic-end-capped Polyimides Using NMR of 13C Labeled Polymers[J]. Macromolecules, 1997, 30:515-519.
[8]	Meador M A, Johnston J C, Cavano P J, et al.Oxidative Degradation of Nadic End Capped Polyimides.2.Evidence for Reactions Occurring at High Temperatures[J]. Macromolecules, 1997, 30:3215-3223.
[9]	Wilson D. PMR-15 Processing, Properties and Problems[J]. Brit Polym J, 1988, 20:405-416.
[10]	Scola D A, Vontell J H, et al, Mechanical Properties and Mechanism of the Degradation Process of 316 ℃ Isothermally Aged Graphite Fiber/PMR-15 Composites[J]. Polym Eng Sci, 1991, 31(1):6-13.
[11]	Pater R H. Interpenetrating Polymer Network Approach to Tough and Microcracking Resistant High Temperature Polymers.Ⅱ.LaRC-RP41[J]. Polym Eng Sci, 1991, 31(1):20-27.
[12]	Stenzenberger H D. The Preparation and Properties of High Performance Polyimide Composites[J]. Appl Polym Symp, 1973, 22:77-88.
[13]	Potter B D, Yuan F G, Pater R H. The Effect of Molecular Weight on Transverse Microcracking in High-temperature LaRC-RP46T Polyimide Composites[J]. J Adv Mat, 1993, 10:30-34.
[14]	Scola D A, Vontell J H. Process Characteristics of High Temperature Polymers and Composites[C]. The 34th Int SAMPE Symp, Reno, Nevada:Reno Convention Center, 1989:88-97.
[15]	Florence M, Loustalot G. New Thermostable Synthesis: Structure Property Relationships of Nadic Terminated Telechelic Fluorine Polyimides[J]. Polym Int, 1996, 41:135-149.
[16]	Scola D A, Wai M, et al.The Thermo-oxidative Stability of Fluorinated Polyimides and Polyimides/graphite Composites at 371 ℃[J]. J Appl Polym Sci, 1994, 52:421-429.
[17]	WANG Dong, WU Yaoman, LI Jiaze, et al.Methyl-5-norbornene-2, 3-dicarboxylic Anhydride-terminated Polyimide Resins and Composites[J]. Acta Polym Sin, 1980, 3:152-158(in Chinese). 王东, 吴瑶曼, 李家泽, 等. 双环[2.2.1]庚-5-烯-2, 3-二羧酸酐封头的聚酰亚胺树脂及其复合材料[J]. 高分子通讯, 1980, 3:152-158.
[18]	YANG Shiyong, GAO Shengqiang, HU Aijun, et al. Progress in High Temperature Polyimide Matrix Resins and Carbon Fiber Reinforced Composites[J]. Aerospace Mater Technol, 2000, 1:1-6(in Chinese). 杨士勇, 高生强, 胡爱军, 等. 耐高温聚酰亚胺树脂及其复合材料的研究进展[J]. 宇航材料工艺, 2000, 1:1-6.
[19]	DING Mengxian, ZHANG Jin. The Preparation of Polyimides and Their Precursor Solution: CN 95100239.2[P], 1995 -01-18(in Chinese). 丁孟贤, 张劲. 聚酰亚胺及其前体溶液的制备方法:中国, 95100239.2[P], 1995 -01-18.
[20]	Hergenrother P M, Bryant B G, et al.Phenylethynyl-terminated Imides Oligomers and Polymers Therfrom[J]. J Polym Sci, Part A:Polym Chem, 1994, 32:3061-3067.
[21]	Hergenrother P M. Composites for High-speed Civil Transports[J]. Trends Polym Sci, 1996, 4:104-105.
[22]	Johnston J A, Li F M, Harris F W. Synthesis and Characterization of Imide Oligomers End-capped with 4-Phenylethynylphthalic Anhydrides[J]. Polymer, 1994, 35:4865-4873.
[23]	Hou T, Jensen B, Hergenrother P. Processing and Properties of IM7/PETI Composites[J]. J Compos Mater, 1996, 30:109-122.
[24]	Smith Jr. J G, Connell J W, Hergenrother P M, et al. Resin Transfer Moldable Phenylethynyl Containing Imide Oligomers[J]. J Compos Mater, 2002, 19:2255-2265.
[25]	Connell JW, Joseph G, Smith Jr.JG, et al. High Temperature Transfer Molding Resins:Laminate Properties of PETI-298 and PETI-330[J]. High Perform Polym, 2003, 15:375-394.
[26]	Ding M. Isomeric Polyimides[J]. Prog Polym Sci, 2007, 32:623-668.
[27]	Hasegawa M, Sensui N, Shido Y, et al.Structure and Properties of Novel Asymmetric Biphenyl Type Polyimides.Homo- and Copolymers and Blends[J]. Macromolecules, 1998, 32:387-396.
[28]	Yokota R, Yamamoto S, Yano S, et al.Molecular Design of Heat Resistant Polyimides Having Excellent Processability and High Glass Transition Temperature[J]. High Perform Polym, 2001, 13:S61-S72.
[29]	Zhou H W, Chen C H, Yokota R, et al.Synthesis and Properties of Copolyimides Derived from Isometric Biphenyltetracarboxylic Dianhydrides(a-BPDA and i-BPDA) and Oxydiphthalic Dianhydride(ODPA) with 4, 4'-Oxydianiline(4, 4'-ODA)[J]. High Perform Polym, 2005, 17:213-224.
[30]	Ogasawara T, Ishida Y, Yokota R, et al.Processing and Properties of Carbon Fiber/Triple-A Polyimide Composites Fabricated from Imide Oligomer Dry Prepreg[J]. Composites:Part A, 2007, 38:1296-1303.
[31]	Smith J, Connell J, Hergenrother P, et al.Transfer Molding Imide Resins Based on 2, 3, 3', 4'-Biphenyltetracarboxylic Dianhydride[J]. Macromol Symp, 2003, 199:401-418.
[32]	Bain S, Ozawa H, Criss J. Development of a Cure/Postcure Cycle for PETI-330 Laminates Fabricated by Resin Transfer Molding[J]. High Perform Polym, 2006, 18:991-1001.
[33]	Connell J W, Smith Jr. J G, Hergenrother P M, et al. High Temperature Transfer Molding Resins:Preliminary Composite Properties of PETI-375[C]. Proceedings of 48th Int'l SAMPE Sym., May, Long Beach CA 2003.
[34]	MENG Xiangsheng, LI Hongshen, YANG Huili, et al.High-temperature Resistant Isomeric Polyimide Resins and Their Composite[J]. Acta Mater Compos Sin, 2011, 28:1-6(in Chinese). 孟祥胜, 李洪深, 杨慧丽, 等. 耐高温异构聚酰亚胺树脂及其复合材料[J]. 复合材料学报, 2011, 28:1-6.
[35]	LIU Zhizhen, LI Hongyun, XING Jun, et al.Research on RTMable Polyimide Composites Toughened by Ex-Situ Method[J]. J Aeronaut Mater, 2008, 28(6):72-77(in Chinese). 刘志真, 李宏运, 刑军, 等. RTM聚酰亚胺复合材料“离位”增韧技术研究[J]. 航空材料学报, 2008, 28(6):72-77.
[36]	LIU Zhizhen, GUO Enyu, XING Jun, et al.Application of Carbon Fiber/RTMable Polyimde Composites by Ex-situ Toughening Method[J]. Acta Mater Compos Sin, 2010, 27(6):1-6(in Chinese). 刘志真, 郭恩玉, 刑军, 等. “离位”增韧技术在碳纤维/RTM聚酰亚胺复合材料中的应用[J]. 复合材料学报, 2010, 27(6):1-6.
[37]	FAN Lin, CHEN Jiansheng, YANG Shiyong, et al. Progress in High Performance Polyimide Materials[J]. J Mater Eng, 2007, special issue 1:160-163(in Chinese). 范琳, 陈建升, 杨士勇, 等. 高性能聚酰亚胺材料的研究进展[J]. 材料工程, 2007, 增刊 1:160-163.
[38]	CHEN Jiansheng, ZUO Hongjun, YANG Shiyong, et al.Synthesis and Characterization of High Temperature Transfer Molding Polyimide Resins[J]. J Aeronaut Mater, 2006, 26(3):183-186(in Chinese). 陈建升, 左红军, 杨士勇, 等. 适用于RTM成型聚酰亚胺树脂的合成与性能研究[J]. 航空材料学报, 2006, 26(3):183-186.
[39]	Fang X, Wang Z, Yang Z, et al.Novel Polyimides Derived from 2, 3, 3', 4'-Benzophenonetetracarboxylic Dianhydride[J]. Polymer, 2003, 44:2641-2646.
[40]	Chuang C H. Solvent Free Low-melt Viscosity Imide Oligomers and Thermosetting Polyimide Composites:US Patent:7, 015, 304[P], 2004.
[41]	Ishida Y, Ogasawara T, Yokota R. Development of Highly Soluble Addition-type Imide Oligomers for Matrix of Carbon Fiber Composite(I):Imide Oligomers Based on Asymmetric Biphenyltetracarboxylic Dianhydride and 9, 9-Bis(4-aminophenyl) fluorene[J]. High Perform Polym, 2006, 18:727-737.
[42]	Miyauchi M, Ishida Y, Ogasawara T, et al.Synthesis and Characterization of Soluble Phenylethynyl-terminated Imide Oligomers Derived from Pyromellitic Dianhydride and 2-Phenyl-4, 4'-diaminodiphenyl Ether[J]. React Funct Polym, 2013, 73:340-345.
[43]	Meng X, Yan J, Liu J, et al.Thermosetting Polyimides and Composites Based on highly Soluble Phenylethynyl-terminated Isoimide Oligomers[J]. RSC Adv, 2014, 4(71):37458-37469.
[44]	Huang W, Wunder S. FTIR Investigation of Cross-linking and Isomerization Reactions of Acetylene-terminated Polyimide and Polyisoimide Oligomers[J]. J Polym Sci Part B Polym Phys, 1994, 32:2005-2017.
[45]	Huang W, Wunder S. A dynamic FT-IR Method for Determining the Curing Temperature Ranges of an Acetylene-terminated Polyisoimide Prepolymer[J]. J Appl Polym Sci, 1996, 59:511-520.
[46]	Landis A,Isoimide containing oligomers:US Patent, 4, 438, 273[P], 1984.
[47]	Zhou H, Liu F, Zhang Y, et al.Novel Acetylene-terminated Polyisoimides with Excellent Processability and Properties Comparison with Corresponding Polyimides[J]. J Appl Polym Sci, 2011, 122: 3493-3503.
[48]	Hergenrother P. The Use, Design, Synthesis, Properties of High Performance/High Temperature Polymers:An Overview[J]. High Perform Polym, 2003, 15(1):3-45.

Progress in Thermosetting Polyimide Resins

RichHTML

PDF

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 10

Recommended Articles

Metrics

Comments

[1]	BO Chun-Hui, JIANG Wei-Jia, WANG Yu-Gao, SHI Li-Hong, DONG Chuan. Research Progress on Synthesis of Coal-based Carbon Quantum Dots [J]. Chinese Journal of Applied Chemistry, 2021, 38(7): 767-788.
[2]	GUO Ying,LI Wuwu,LIU Yang. Carbon Dots and Their Research Progress in Chemiluminescence Analysis [J]. Chinese Journal of Applied Chemistry, 2016, 33(6): 624-632.
[3]	GAO Guofeng,LI Dandan,HAO Genyan,LI Jinping,ZHAO Qiang. Progress and Prospect of Iron Based Anodic Oxygen Evolving Catalysts [J]. Chinese Journal of Applied Chemistry, 2016, 33(5): 504-512.
[4]	ZHOU Wenjun,DENG Jiaying. Research Progress of Iron-catalyzed Cross-coupling Reactions [J]. Chinese Journal of Applied Chemistry, 2016, 33(3): 245-266.
[5]	ZHU Zhaoqiang,DU Weimin,GUO Wei,ZHU Wenjuan. Research Progress of Preparation and Application of Transition Metal Ternary Compounds in Supercapacitors [J]. Chinese Journal of Applied Chemistry, 2016, 33(3): 267-276.
[6]	LIN Hang,WANG Bo,WANG Yuansheng. Research Progress in the Design, Preparation,Microstructure, and Luminescent Properties of the Glass Ceramics Applicable to White Light-emitting Diode [J]. Chinese Journal of Applied Chemistry, 2016, 33(10): 1126-1139.
[7]	TANG Nana,LIU Leifang . Research Progress in Suzuki Coupling Reaction of Potassium Organotrifluoroborates [J]. Chinese Journal of Applied Chemistry, 2015, 32(1): 10-18.
[8]	WU Zhifu1, SHI Yunfeng1, WU Hankui1, HOU Yue2. Research Progress of Nanoscale Bismuth Oxide [J]. Chinese Journal of Applied Chemistry, 2014, 31(12): 1359-1367.
[9]	HOU Changjun1*, ZHANG Yuchan1, HUANG Shun1, LIU Zhen1, SHEN Caihong2, ZHANG Suyi2, HUO Danqun1. Research Progress of Biomolecular Recognition Based on Porphyrins and Porphyrin Derivatives [J]. Chinese Journal of Applied Chemistry, 2011, 28(09): 977-985.
[10]	ZHOU Ming1,2*, ZHAO Jinzhou3,4, LIU Jianxun5, YANG Yan1. Progress in the Synthesis of Sulfonate Gemini Surfactants [J]. Chinese Journal of Applied Chemistry, 2011, 28(08): 855-863.