应用化学 ›› 2021, Vol. 38 ›› Issue (1): 60-68.DOI: 10.19894/j.issn.1000-0518.200236

• 研究论文 • 上一篇    下一篇

溶剂诱导的聚乳酸/聚乳酸衍生物共结晶行为

曹友錋1,2, 庞烜1, 项盛1, 王天昶1, 冯立栋1, 边新超1, 李杲1,2*, 陈学思1,2   

  1. 1 中国科学院长春应用化学研究所,生态环境高分子材料重点实验室,长春 130022
    2中国科学技术大学,合肥 230026
  • 收稿日期:2020-08-06 修回日期:2020-09-30 出版日期:2021-01-01 发布日期:2021-02-01
  • 通讯作者: *E-mail:ligao@ciac.ac.cn
  • 基金资助:
    国家自然科学基金(Nos.51973220,51773194,51973219)和国家重点研发计划(No.2016YFB0302500)项目资助

Solution-Induced Co-crystallization in Poly(lactic acid)/ Substituted Poly(lactic acid) Blends

CAO You-Peng1,2, PANG Xuan1, XIANG Sheng1, WANG Tian-Chang1, FENG Li-Dong1, BIAN Xin-Chao1, LI Gao1,2*, CHEN Xue-Si1,2   

  1. 1Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China;
    2University of Science and Technology of China, Hefei 230026, China
  • Received:2020-08-06 Revised:2020-09-30 Published:2021-01-01 Online:2021-02-01
  • Supported by:
    National Natural Science Foundation of China (Nos.51973220, 51773194, 51973219) and the National Key Research and Development Program of China (No.2016YFB0302500)

摘要: 通过溶液浇铸法制备不同组分的左旋聚乳酸(PLLA)和聚(L-2-羟基-3-甲基丁酸)(PL-2H3MB)共混物。 运用差示扫描量热仪(DSC)、偏光显微镜(POM)、广角X射线衍射(WAXD)和热重分析仪(TGA)分析共混物的结晶、熔融行为和热稳定性。 通过观察到DSC加热曲线中新的熔融峰判断PLLA和PL-2H3MB共晶的形成,共晶显著提高PLLA起始结晶温度和WAXD曲线中特征衍射峰的变化,证实了溶液浇铸共混物中的共结晶现象。 同时,共混物中PL-2H3MB和PLLA还表现出优于单组分PLLA和PL-2H3MB的热稳定性。 PLLA和PL-2H3MB的共结晶行为可能为调控PLLA的热稳定性、力学性能以及降解性能提供了一种新的潜在方法。

关键词: 聚乳酸, 聚(L-2-羟基-3-甲基丁酸), 溶液浇铸共混物, 共结晶, 热稳定性

Abstract: The blends of poly(L-lactic acid) (PLLA) and poly(L-2-hydroxy-3-methylbutanoic acid) (PL-2H3MB) with different compositions were prepared by solution casting. The crystallization, melting and pyrolysis properties of the blends were investigated by differential scanning calorimetry (DSC), polarized optical microscope (POM), wide angle X-ray diffractometry (WAXD) and thermogravimetric analysis (TGA). The formation of PLLA and PL-2H3MB co-crystals was speculated due to the observation of the new melting peak in DSC first heating profile. The co-crysals significantly increased the initial crystallization temperature of PLLA and the characteristic diffraction peaks in WAXD profile were also shifted, which both confirmed the co-crystallization phenomenon in solution casting blend. At the same time, the thermal stability of PLLA/PL-2H3MB blends was better than that of neat PLLA or PL-2H3MB. The co-crystallization behavior of PLLA and PL-2H3MB may provided a new potential method to regulate the thermal stability, mechanical properties and degradation properties of PLLA.

Key words: Poly(lactic acid), Poly(l-2-hydroxy-3-methylbutanoic acid), Solution-casted blends, Co-crystallization, Thermal stability

中图分类号: