1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响

doi:10.11944/j.issn.1000-0518.2019.02.180380

摘要/Abstract

摘要：

为了探索生物基乙二醇中的1,2-丁二醇(1,2-BDO)作为共聚单体对生物基聚对苯二甲酸乙二醇酯(PET)的结晶行为和力学性能的影响。本文合成了生物基PET均聚物和不同1,2-BDO共聚单元摩尔分数的系列生物基PET共聚物(共聚单体摩尔分数分别为2.0%、2.7%和5.6%),并采用傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)和力学测试等技术手段研究了其结晶行为和力学性能。结果表明,随着1,2-BDO共聚单元摩尔分数的增加,PET共聚物的熔融温度、结晶速率及结晶度均明显降低,表明1,2-BDO共聚单体的引入破坏了PET分子链的规整性,阻碍了PET链段的结晶。 PET材料的拉伸强度随着1,2-BDO共聚单元摩尔分数的增加而降低,而弯曲强度和弯曲模量略有升高。

关键词: 生物基聚对苯二甲酸乙二醇酯, 共聚, 1, 2-丁二醇, 结晶行为, 力学性能

Abstract:

In this work, poly(ethylene terephthalate)(PET) homopolymer and copolymers were synthesized from biomass-derived ethylene glycol containing 0, 2.0%, 2.7%, and 5.6% mole fraction of 1,2-butanediol(1,2-BDO) in order to explore the effects of the comonomer on the crystallization behavior and the mechanical properties of the PET. The polymers were investigated by Fourier transform infrared spectroscopy(FTIR), differential scanning calorimetry(DSC), and mechanical testing. It is found that the melting temperature, crystallization rate and crystallinity of the PET decrease as mole fraction of 1,2-BDO comonomer increases, indicating that the incorporation of the 1,2-BDO units can disrupt the ordered structure of the PET chains and therefore hinder the crystallization. In addition, the tensile strength of PET materials decreases while the flexural modulus and strength increase slightly at higher 1,2-BDO mole fraction.

Key words: poly(ethylene terephthalate), copolymers, 1, 2-butanediol, crystallization behavior, mechanical properties

钟振兴, 刘桂兰, 李永海, 李连国, 黄燕, 张光宇, 苏朝晖. 1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响[J]. 应用化学, 2019, 36(2): 170-175.

ZHONG　Zhenxing, LIU Guilan, LI Yonghai, LI Lianguo, HUANG Yan, ZHANG Guangyu, SU Zhaohui. Effects of 1,2-Butanediol Comonomer on the Crystallization Behavior and Mechanical Properties of Poly(ethylene terephthalate)[J]. Chinese Journal of Applied Chemistry, 2019, 36(2): 170-175.

参考文献

[1]	Huber G W,Iborra S,Corma A.Synthesis of Transportation Fuels from Biomass:Chemistry, Catalysts, and Engineering[J]. Chem Rev,2006,106(9):4044-4098.
[2]	Gallezot P.Conversion of Biomass to Selected Chemical Products[J]. Chem Soc Rev,2012,41(4):1538-1558.
[3]	Climent M J,Corma A,Iborra S.Conversion of Biomass Platform Molecules into Fuel Additives and Liquid Hydrocarbon Fuels[J]. Green Chem,2014,16(2):516-547.
[4]	Corma A,Iborra S,Velty A.Chemical Routes for the Transformation of Biomass into Chemicals[J]. Chem Rev,2007,107(6):2411-2502.
[5]	Rose M,Palkovits R.Isosorbide as a Renewable Platform Chemical for Versatile Applications-Quo Vadis?[J]. ChemSusChem,2011,5(1):167-176.
[6]	Fenouillot F,Rousseau A,Colomines G,et al. sPolymers from Renewable 1,4:3,6-Dianhydrohexitols (Isosorbide, Isomannide and Isoidide):A Review[J]. Prog Polym Sci,2010,35(5):578-622.
[7]	Mäki-Arvela P,Simakova I L,Salmi T,et al. Production of Lactic Acid/Lactates from Biomass and Their Catalytic Transformations to Commodities[J]. Chem Rev,2014,114(3):1909-1971.
[8]	HAN Guocheng.Development and Application of Environment-Friendly Polyester Material[J]. Plast Sci Technol,2018,46:121-126(in Chinese). 韩国程. 环保型聚酯材料的发展及应用[J]. 塑料科技,2018,46:121-126.
[9]	Tsai T Y,Naveen B,Shiu W C,et al. An Advanced Preparation and Characterization of the PET/MgAl-LDH Nanocomposites[J]. RSC Adv,2014,4(49):25683-25691.
[10]	Wang D R,Luo F L,Shen Z Y,et al. A Study on the Crystallization Behavior and Mechanical Properties of Poly(ethylene terephthalate) Induced by Chemical Degradation Nucleation[J]. RSC Adv,2017,7(59):37139-37147.
[11]	Xiao B,Zhen M Y,Pang J F,et al. Synthesis and Characterization of Poly(ethylene terephthalate) from Biomass-Based Ethylene Glycol:Effects of Miscellaneous Diols[J]. Ind Eng Chem Res,2015,54:5862-5869.
[12]	Fann D M,Huang S K,Lee J Y.DSC Studies on the Crystallization Characteristics of Poly(Ethylene Terephthalate) for Blow Molding Applications[J]. Polym Eng Sci,1998,38(2):265-273.
[13]	Deshmukh G S,Pathak S U,Peshwe D R,et al. Effect of Uncoated Calcium Carbonate and Stearic Acid Coated Calcium Carbonate on Mechanical, Thermal And Structural Properties of Poly(Butylene Terephthalate)(PBT)/Calcium Carbonate Composites[J]. Bull Mater Sci,2010,33(3):277-284.

[1]	李谋翠, 董洋铭, 任莹辉, 马海霞, 齐乐. 含1，2，4-三唑双席夫碱衍生物的合成、抗菌活性及分子对接[J]. 应用化学, 2023, 40(1): 116-125.
[2]	成燕琴, 黎卓熹, 王有娣, 徐娟娟, 卞证. 结构简单的4-羟基脯氨酰胺高效催化醛和硝基烯不对称迈克尔加成反应[J]. 应用化学, 2023, 40(1): 146-154.
[3]	杨雪贤, 张健, 谷志刚. 表面配位金属-有机框架薄膜HKUST-1在光电应用中的研究进展[J]. 应用化学, 2022, 39(7): 1013-1025.
[4]	温景惠, 赵冰, 阚伟, 王丽艳, 孙立, 宋天舒, 宋波. 可区别铁离子荧光探针异构体的合成及其水样分析[J]. 应用化学, 2022, 39(5): 787-796.
[5]	唐永鑫, 聂立武. 环氧树脂掺量对发光树脂透水混凝土性能的影响[J]. 应用化学, 2022, 39(11): 1665-1671.
[6]	张健爽, 高美珍, 王梦瑶, 石琪, 董晋湘. 沸石咪唑酯骨架结构材料ZIF-71用于低浓度生物基2，3-丁二醇/1，3-丙二醇的吸附分离性能[J]. 应用化学, 2022, 39(11): 1735-1745.
[7]	陈颖, 胡天丁, 刘云利, 张蒲, 支云飞, 陕绍云. 二氧化硫在化学资源化利用中的研究进展[J]. 应用化学, 2022, 39(02): 223-234.
[8]	程久庚, 苏朝晖. 原子力-红外光谱定量分析聚1-丁烯／聚丙烯共混物的相区组成[J]. 应用化学, 2022, 39(02): 266-271.
[9]	闫宇飞, 陈继, 李凯, 邹丹, 李德谦. 含氟硫酸介质中伯胺N1923对Ce（Ⅳ）的萃取[J]. 应用化学, 2022, 39(02): 307-314.
[10]	赵宇航, 韩超群, 刘瑾, 夏星, 王艺皓, 杨建军. 不同pH条件下典型有机磷核磁图谱差异性解析[J]. 应用化学, 2022, 39(02): 315-321.
[11]	胡晓华, 熊诗圣. 先进光刻技术:导向自组装[J]. 应用化学, 2021, 38(9): 1029-1078.
[12]	田昕, 赖翰文, 刘亚栋, 季生象. 基于卷积运算的嵌段共聚物自组装图像缺陷分析统计方法[J]. 应用化学, 2021, 38(9): 1199-1208.
[13]	张宝华, 史兰香, 郭瑞霞. 金刚烷负载高价碘试剂的合成及氧化反应活性[J]. 应用化学, 2021, 38(6): 0-0.
[14]	张宝华, 史兰香, 郭瑞霞. 金刚烷负载高价碘试剂的合成及氧化反应活性[J]. 应用化学, 2021, 38(6): 651-657.
[15]	周莹, 刘赛男, 蔡砺寒, 张健夫, 逄茂林. 铁掺杂的聚2-硝基-1,4-苯二胺纳米球的制备及在光热/光动力/化学动力学肿瘤治疗中的应用[J]. 应用化学, 2021, 38(2): 0-0.