应用化学

• 研究论文 • 上一篇    下一篇

四甲基苯二甲基二异氰酸酯基水性聚氨酯的合成和性能

徐恒志,王焕,戴震,黄毅萍,许戈文*   

  1. (安徽大学化学化工学院,安徽省绿色高分子材料重点实验室 合肥 230039)
  • 收稿日期:2011-07-22 修回日期:2011-10-10 出版日期:2012-06-10 发布日期:2012-06-10
  • 通讯作者: 许戈文,研究员; Tel/Fax:0551-5107620; E-mail:xugw@china.com; 研究方向:水基高分子
  • 基金资助:
    安徽大学研究生学术创新研究资助项目(Y9h090029)

Synthesis and Properties of Waterborne Polyurethane Based Tetramethyl Xylene Diisocyanate

XU Hengzhi, WANG Huan, DAI Zhen, HUANG Yiping, XU Gewen*   

  1. (School of Chemistry and Chemical Engineering,Anhui University;Anhui Key Laboratory of
    Environment-friendly Polymer Materials,Hefei 230039,China)
  • Received:2011-07-22 Revised:2011-10-10 Published:2012-06-10 Online:2012-06-10

摘要: 采用四甲基苯二甲基二异氰酸酯、聚酯二元醇和二羟甲基丙酸为原料,合成了一系列具有不同异氰酸根与羟基摩尔比(n(—NCO)/n(—OH))的聚氨酯乳液。 研究了n(—NCO)/n(—OH)对水性聚氨酯性能的影响。 结果表明,当该比值增加时,乳液的粒径增大,分布变宽,结晶性降低,耐热性下降,耐水性能呈现降低的趋势。 当异氰酸根与羟基摩尔比为3时,四甲基苯二甲基二异氰酸酯基水性聚氨酯的乳液粒径为10~30 nm,膜的分解温度达到275 ℃,24 h吸水率低于10%。

关键词: 水性聚氨酯, 四甲基苯二甲基二异氰酸酯, 热性能, 耐水

Abstract: A series of waterborne polyurethane(WPU) dispersions with different molar ratio of —NCO to —OH(n(—NCO)/n(—OH)) were synthesized using tetramethyl xylene diisocyanate(TMXDI), polyester diol and dimethylolpropionic acid as raw materials. The effect of n(—NCO)/n(—OH) on the properties of WPU was investigated. The experiment results showed that with the increase of n(—NCO)/n(—OH), the particle size increased while the particle size distribution became wider; the crystallinity, thermostability and the water resistance tend to decrease as well. When n(—NCO)/n(—OH) was 3.0, the particle size of WPU based TXMDI was fallen in the range of 10 to 30 nm, the decomposition temperature and 24 h water absorption of WPU film were 275 ℃ and below 10%, respectively.

Key words: Waterborne polyurethane, TMXDI, thermal properties, water resistance

中图分类号: