应用化学 ›› 2017, Vol. 34 ›› Issue (5): 563-571.DOI: 10.11944/j.issn.1000-0518.2017.05.160306

• 研究论文 • 上一篇    下一篇

煤基固体酸催化合成席夫碱反应

吴之强a,徐泽杨a,毕淑娴a,詹海鹃a,马保军b,刘万毅a*()   

  1. 宁夏大学a化学化工学院
    b能源化工重点实验室 银川 750021
  • 收稿日期:2016-08-04 接受日期:2016-11-04 出版日期:2017-05-02 发布日期:2017-05-02
  • 通讯作者: 刘万毅
  • 基金资助:
    国家自然科学基金项目(21166021,51364038) 宁夏大学研究生创新项目(GIP201642)资助

Synthesis of Schiff Base Catalyzed by Coal-based Solid Acid Catalyst

WU Zhiqianga,XU Zeyanga,BI Shuxiana,ZHAN Haijuana,MA Baojunb,LIU Wanyia*()   

  1. aCollege of Chemistry and Chemical Engineering
    bKey Laboratory and Energy Sources & Engineering,Ningxia University,Yinchuan,750021,China;
  • Received:2016-08-04 Accepted:2016-11-04 Published:2017-05-02 Online:2017-05-02
  • Contact: LIU Wanyi
  • Supported by:
    Supported by the Natural Science Foundation of China(No.21166021, No.51364038), Graduate Innovative Project of Ningxia University(No.GIP201642)

摘要:

以煤基活性炭(AC)和苯胺(ANI)为原料,通过原位-溶液聚合法制备了煤基固体酸催化剂AC@PANI-SO3H(APS),利用扫描电子显微镜(SEM)、傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)和热重分析(TG)等技术手段对催化剂进行了结构和性能的表征。 研究了该催化剂在微波辐射下催化合成Schiff碱化合物的活性,并对其催化工艺条件进行了优化考察。 结果表明,催化剂用量5%(以每摩尔邻苯二胺用量为基准),反应时间3~20 min,溶剂选用乙醇(EtOH),Schiff碱化合物产率可达80%~93%,说明该催化剂在微波催化合成席夫碱反应中变现出良好的催化活性,反应时间短,工艺简单操作,且催化剂能重复使用5次。 通过红外发现,催化剂重复5次后活性下降的主要原因是固体酸表面键合的磺酸基官能团消失,从而导致活性降低。

关键词: 煤, 固体酸, Schiff碱合成, 微波辐射, 工艺优化

Abstract:

A coal-based solid acid catalyst AC@PANI-SO3H(APS) was prepared in situ by solution polymerization using coal-based activated carbon(AC) and aniline(ANI) as raw materials. The catalyst was characterized by scanning elecrton microscopy(SEM), Fourier transform infrared spectrometer(FTIR), X-ray photoelectron spectroscopy(XPS), and thermal gravimetric analyzer(TGA). Its catalytic activity on yield of Schiff bases was studied under microwave irradiation. The results show that with 5 %(based on the amount of o-phenylenediamine per mole) catalyst, the reaction in ethanol is performed for 3 to 20 min, the yield of Schiff-bases is 80% to 93%. It is proved that the catalyst exhibits good catalytic activity in the microwave-catalyzed synthesis of Schiff base. The reaction time is short, the process is simple to operate, and the catalyst can be reused 5 times. The main reason for the decrease of the activity of the catalyst after repeated 5 times is that the sulfonic acid functional groups bonded to the solid acid surface is disappeared and the activity is decreased.

Key words: coal, solid acid, schiff-base synthesis, microwave radiation, process optimization