应用化学 ›› 2015, Vol. 32 ›› Issue (7): 801-807.DOI: 10.11944/j.issn.1000-0518.2015.07.140412

• 研究论文 • 上一篇    下一篇

CeO2/TiO2光催化剂的制备及其可见光脱氮性能

陈峰a,郑柳萍bd,黄莹莹b,颜桂炀abc**(),王颖a   

  1. a宁德师范学院化学系 福建 宁德 352100
    b
    福建师范大学化学与化工学院 福州 350007
    c福州大学光催化研究所,能源与环境光催化国家重点实验室 福州 350002
    d福建省高分子材料重点实验室 福州 350007
  • 收稿日期:2014-12-01 接受日期:2015-02-14 出版日期:2015-06-30 发布日期:2015-06-30
  • 基金资助:
    国家自然科学基金项目(21473096),宁德师范学院服务海西项目(2010H103),福建省交通运输厅科技项目(201323)

Preparation and Visible Light Denitrification Performance of CeO2/TiO2 Photocatalyst

CHEN Fenga, ZHENG Liupingb, d, HUANG Yingyingb, YAN Guiyanga, b, c, *, WANG Yinga   

  1. aDepartment of Chemistry,Ningde Normal University,Ningde,Fujian 352100,China
    bCollege of Chemistry and Chemical Engineering,Fujian Normal University,Fuzhou 350007,China
    cResearch Institute of Photocatalysis,State Key Laboratory of Photocatalysis on Energy and Environment,Fuzhou University,Fuzhou 350002,China
    dFujian Key Laboratory of Polymer Materials,Fuzhou 350007,China
  • Received:2014-12-01 Accepted:2015-02-14 Published:2015-06-30 Online:2015-06-30
  • Contact: Guiyang YAN
  • Supported by:
    Supported by the NSFC (No.21473096), the Ningde Normal University Projects on Serving the Western Coast to the TW strait (No.2010H103), the Project of Fujian Province Communications Department (No.201323)

摘要:

采用溶胶-凝胶和浸渍掺杂两步法合成了CeO2/TiO2光催化剂,并对催化剂的理化结构进行表征分析;以吡啶-正辛烷体系为模拟油品氮源,研究了该催化剂在可见光作用下的光催化脱氮行为,并探究了光催化脱氮的最佳反应条件。 结果表明,掺杂的铈主要以CeO2的形式存在,且增强了催化剂在可见光区的吸收;在可见光辐照150 min的条件下,铈的掺杂量质量分数为8%,所制备的CeO2/TiO2催化剂投入量为1.0 g/L时,模拟油品中吡啶的脱氮率高达76.45%。

 

关键词: 光催化剂, CeO2/TiO2, 模拟油品, 脱氮

Abstract:

CeO2/TiO2 photocatalyst was synthesized by sol-gel processing and dip-doping technique. Its physicochemical structure and properties were characterized. With pyridine n-octane system as the nitrogen source of simulative oil, the denitrification behavior of this photocatalyst under visible light was studied. The optimal photocatalysis reaction conditions were also explored. The doped cerium component in CeO2 enhances the adsorption of catalyst in the visible light region. When the illumination time is 150 min under visible light, the amount of cerium doped is 8%, the dosage of the CeO2/TiO2 photocatalyst is 1.0 g/L, the denitrification percent of pyridine in the simulative oil reaches up to 76.45%.

Key words: photocatalyst, CeO2/TiO2, simulative oil, denitrification

中图分类号: