1 |
CHONG L, WEN J, KUBAL J, et al. Ultralow-loading platinum-cobalt fuel cell catalysts derived from imidazolate frameworks[J]. Science, 2018, 362(6420): 1276-1281.
|
2 |
KONGKANAND A, SUBRAMANIAN N P, YU Y, et al. Achieving high-power PEM fuel cell performance with an ultralow-Pt-content core-shell catalyst[J]. ACS Catal, 2016, 6(3): 1578-1583.
|
3 |
ZHAO Z, LIU Z, ZHANG A, et al. Graphene-nanopocket-encaged PtCo nanocatalysts for highly durable fuel cell operation under demanding ultralow-Pt-loading conditions[J]. Nat Nanotechnol, 2022, 17: 968-975.
|
4 |
CHOI J, LEE Y J, PARK D, et al. Highly durable fuel cell catalysts using crosslinkable block copolymer-based carbon supports with ultralow Pt loadings[J]. Energy Environ Sci, 2020, 13(12): 4921-4929.
|
5 |
WANG G, HUANG B, XIAO L, et al. Pt skin on AuCu intermetallic substrate: a strategy to maximize Pt utilization for fuel cells[J]. J Am Chem Soc, 2014, 136(27): 9643-9649.
|
6 |
TANG M, ZHANG S, CHEN S. Pt utilization in proton exchange membrane fuel cells: structure impacting factors and mechanistic insights[J]. Chem Soc Rev, 2022, 51(4): 1529-1546.
|
7 |
YUAN X Z, NAYOZE-COYNEL C, SHAIGAN N, et al. A review of functions, attributes, properties and measurements for the quality control of proton exchange membrane fuel cell components[J]. J Power Sources, 2021, 491: 229540-229578.
|
8 |
ZENG Y C, GUO X Q, WANG Z Q, et al. Highly stable nanostructured membrane electrode assembly based on Pt/Nb2O5 nanobelts with reduced platinum loading for proton exchange membrane fuel cells[J]. Nanoscale, 2017, 9(20): 6910-6919.
|
9 |
CHEN Z J, FU T, KONG X B, et al. A novel impregnation-reduction method combined with galvanic replacement for fabricating low cost MEA with high performance for PEM fuel cells[J]. J Electrochem Soc, 2021, 168(3): 034522-034532.
|
10 |
PHILLIPS A, ULSH M, PORTER J, et al. Utilizing a segmented fuel cell to study the effects of electrode coating irregularities on PEM fuel cell initial performance[J]. Fuel Cells, 2017, 17(3): 288-298.
|
11 |
RESHETENKO T V, BENDER G, BETHUNE K, et al. Application of a segmented cell setup to detect pinhole and catalyst loading defects in proton exchange membrane fuel cells[J]. Electrochim Acta, 2012, 76: 16-25.
|
12 |
WYON C, DELILLE D, GONCHOND J P, et al. In-line monitoring of advanced microelectronic processes using combined X-ray techniques[J]. Thin Solid Films, 2004, 450(1): 84-89.
|
13 |
STOCKER M T, BARNES B M, SOHN M, et al. Development of large aperture projection scatterometry for catalyst loading evaluation in proton exchange membrane fuel cells[J]. J Power Sources, 2017, 364: 130-137.
|
14 |
SHARMA R, ANDERSEN S M. An opinion on catalyst degradation mechanisms during catalyst support focused accelerated stress test (AST) for proton exchange membrane fuel cells (PEMFCs)[J]. Appl Catal B, 2018, 239: 636-643.
|
15 |
BAKER A M, WILLIAMS S T D, MUKUNDAN R, et al. Zr-doped ceria additives for enhanced PEM fuel cell durability and radical scavenger stability[J]. J Mater Chem A, 2017, 5(29): 15073-15079.
|
16 |
CAI Y, ZIEGELBAUER J M, BAKER A M, et al. Electrode edge cobalt cation migration in an operating fuel cell: an in situ micro-X-ray fluorescence study[J]. J Electrochem Soc, 2018, 165(6): F3132-F3138.
|
17 |
PATRICK H J, ATTOTA R, BARNES B M, et al. Optical critical dimension measurement of silicon grating targets using back focal plane scatterfield microscopy[J]. J Micro-Nanolith Mem, 2008, 7(1): 013012-013022.
|
18 |
BARNES B M, ATTOTA R, QUINTANILHA R, et al. Characterizing a scatterfield optical platform for semiconductor metrology[J]. Meas Sci Technol, 2011, 22(2): 024003-024011.
|
19 |
DAS P K, WEBER A Z, BENDER G, et al. Rapid detection of defects in fuel-cell electrodes using infrared reactive-flow-through technique[J]. J Power Sources, 2014, 261: 401-411.
|
20 |
AIETA N V, DAS P K, PERDUE A, et al. Applying infrared thermography as a quality-control tool for the rapid detection of polymer-electrolyte-membrane-fuel-cell catalyst-layer-thickness variations[J]. J Power Sources, 2012, 211: 4-11.
|
21 |
VAN CLEVE T, KHANDAVALLI S, CHOWDHURY A, et al. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application[J]. ACS Appl Mater Interfaces, 2019, 11(50): 46953-46964.
|