中华医学超声杂志

应用化学

• 研究论文 • 上一篇    下一篇

p-全氟壬烯氧基苯磺酸聚乙二醇酯表面活性剂的合成及表面活性

赵琴琴,史鸿鑫*,武宏科,陈立军,项菊萍   

  1. (浙江工业大学化学工程与材料科学学院，绿色化学合成技术国家重点实验室培育基地 杭州 310032)
  • 收稿日期:2011-08-29 修回日期:2011-11-20 出版日期:2012-08-10 发布日期:2012-08-10
  • 通讯作者: 史鸿鑫,教授; Tel:0571-88320612; Fax:0751-88320832; E-mail:shihxin@zjut.edu.cn; 研究方向：精细化学品合成和绿色有机合成
  • 基金资助:
    浙江省科技厅创新团队资助项目(2011R09002-10)

Synthesis and Performance of Polyethylene Glycol p-Perfluorous Nonenyloxyphenyl Sulflonate Surfactant

ZHAO Qinqin, SHI Hongxin*, WU Hongke, CHEN Lijun, XIANG Juping   

  1. (Laboratory of Green Chemistry Synthesis-technology,College of Chemical Engineering and
    Materials Science,Zhejiang University of Technology,Hangzhou 310032,China)
  • Received:2011-08-29 Revised:2011-11-20 Published:2012-08-10 Online:2012-08-10
  • Contact: 史鸿鑫 SHI Hong-Xin

PDF

1546

被引次数

11 | 1

摘要： 以p-全氟壬烯氧基苯磺酰氯（PFNPSC）和聚乙二醇(PEG-n)为原料，合成了p-全氟壬烯氧基苯磺酸聚乙二醇酯（PFNPS-PEG-n），用IR和19F NMR对产物结构进行了表征。 考察了聚乙二醇平均相对分子质量和反应时间对反应的影响，测定了PFNPS-PEG-n水溶液的表面活性、泡沫性能和乳化性能。 结果表明,以PEG-600为原料得到的PFNPS-PEG-n表面活性最高，其较优的合成工艺条件为：四氯化碳为溶剂，三乙胺为缚酸剂，n(PEG-600)∶n(PFNPSC)=1∶1，在40 ℃下反应6～8 h，产物PFNPS-PEG-600临界胶束浓度（CMC）为0.56 g/L，表面张力γCMC可达19.1 mN/m；20 mL 1 g/L PFNPS-PEG-600水溶液的泡沫体积95 mL，泡沫半衰期75 s。 PFNPS-PEG-1000的乳化性能最佳。

关键词: 氟碳表面活性剂, 表面张力, 泡沫性能, 乳化性能, 醇解反应

Abstract: Polyethylene glycol p-perfluorous nonenyloxyphenyl sulflonates(PFNPS-PEG-n) were synthesized from p-perfluorous nonenyloxyphenylsulfonyl chloride(PFNPSC) and polyethylene glycol(PEG-n), and were characterized by IR and 19F NMR, respectively. The effects of average relative molecular mass of PEG-n and reaction time on alcoholysis were investigated. The performances of these surfactants such as surface tensions, foaming characterisitics and emulsifiabilities were studied. The surface activity of PFNPS-PEG-n synthesized from PEG-600 is the best, and the optimal reaction conditions are n(PFNPSC)∶n(PEG-600)=1∶1, reacts at 40 ℃ for 6~8 h in CCl4 in the present of NEt3. The critical micelle concentration(CMC) of PFNPSPEG-600 is 0.56 g/L, and its γCMC is 19.1 mN/m; 20 mL 1 g/L PFNPS-PEG-600 will produce 95 mL foam, and its half-life time is 75 s. Emulsifiability of PFNPS-PEG-1000 is the best among PFNPS-PEG-n.

Key words: fluorocarbon surfactant, surface tensions, foaming characterisitics, emulsifiability, alcoholysis

中图分类号: 

网站版权 © 应用化学     本网站备案：吉ICP备12000082号