中华医学超声杂志

应用化学 ›› 1995, Vol. 0 ›› Issue (4): 32-35.

• 研究论文 • 上一篇    下一篇

非晶态Fe-W合金镀层的表面改性

姚素薇1, 赵水林1, 任丽彬1, 郭鹤桐1, M. Kowaka2   

  1. 1. 天津大学应用化学系, 天津 300072;
    2. 日本上村工业公司中央研究所
  • 收稿日期:1994-10-17 修回日期:1994-12-30 出版日期:1995-08-10 发布日期:1995-08-10
  • 基金资助:
    国家自然科学基金资助课题

Surface Modifcation of Amorphous Fe-W Alloy Deposit

Yao Suwei1, Zhao Shuilin1, Ren Libin1, Guo Hetong1, M. Kowaka2   

  1. 1. Department of Applied Chemistry, Tianjin University, Tianjin 300072;
    2. Central Research Laboratory, C.Uyemura Co. Ltd, Japan
  • Received:1994-10-17 Revised:1994-12-30 Published:1995-08-10 Online:1995-08-10

PDF

395

被引次数

5

摘要： 将Fe-W非晶态镀层在铬酸盐钝化液中进行化学钝化与电化学钝化,使之形成含铬钝化膜.阳极极化曲线说明,钝化后镀层的孔蚀电位向正向移动了约1.68V;Fe-W非晶镀层在氯化钠溶液中浸泡近1h表面发生严重腐蚀,而经钝化处理的镀层浸泡1个月,表面无变化,仍具有金属光泽.

关键词: 非晶态合金镀层, Fe-W, 钝化, 耐蚀性

Abstract: The amorphous Fe-W deposit is passivated chemically and electrochemically inchromate solutions in order to form a passive film. Anodic polarization curves show that thepitting potential of passivation moves about 1.68V toward noble. Amorphous Fe-W depositswere corroded severelv within one hour in NaCl solution,but the passivated deposit exhibit-ed no change and maintained metal luster on the surface after one month of immersion.

Key words: amorphous alloy deposit, Fe-W, passivation, anticorrosive property

网站版权 © 应用化学     本网站备案：吉ICP备12000082号