中华医学超声杂志

应用化学 ›› 1987, Vol. 0 ›› Issue (6): 85-87.

• 研究简报 • 上一篇    下一篇

铅酸蓄电池板栅合金的研制——Ⅰ.铅基低锑合金

卢元铎, 方金英, 赵淑珍, 顾维清, 徐素贤, 江志韫   

  1. 中国科学院长春应用化学研究所
  • 收稿日期:1986-12-11 修回日期:1987-03-18 出版日期:1987-12-10 发布日期:1987-12-10

INVESTIGATION OF GRID ALLOYS FOR LEAD ACID BATTERY Ⅰ.ALLOYS WITH LOW ANTIMONY CONTENT

Lu Yuanduo, Fang Jinying, Zhao Shuzhen, Gu Weiqing, Xu Suxinn, Jiang Zhiyun   

  1. Changchun Institute of Applied Chemistry, Academia Sinica
  • Received:1986-12-11 Revised:1987-03-18 Published:1987-12-10 Online:1987-12-10

PDF

390

摘要： 铅酸蓄电池正极板栅已广泛采用低锑合金,不少专利报导了低锑合金的多元配方,对锑的作用机理也进行了许多研究。本文报道几种添加元素对铅基板栅低锑合金的耐腐蚀和机械性能的影响,和一种含锑量为3.5%的合金配方。 原材料采用1*电解铅、高砷锑、纯砷和其它廉价元素。熔炼工艺、腐蚀失重、机械性能、金相、电子探针分析等方法见以前(3—5)各报。

Abstract: The influences of the contents of Sb and As in the lead base alloys on the corrosion weight loss and mechanical properties were studied. The grid alloy containing 3.5% antimony and 0.15% As was scrcened for low maintenance lead acid batteries. The results indicated that the crystal structure and distribution of antimony in alloy were affected oviously by thbe addition of As. The influence of Sb and As on the corrosion weight loss and mechanical properties is discussed.

网站版权 © 应用化学     本网站备案：吉ICP备12000082号