应用化学 ›› 2020, Vol. 37 ›› Issue (6): 673-682.DOI: 10.11944/j.issn.1000-0518.2020.06.190325

• 研究论文 • 上一篇    下一篇

壳聚糖-Fe(Ⅲ)复合凝胶球去除磷酸根的影响因素与吸附机理

赵冰冰a,邓东阳b,陈桂华b,宋清梅b,付建平b,张素坤b,周成勇ac*(),鞠勇明b   

  1. a山西师范大学化学与材料科学学院 山西 临汾 041000
    b生态环境部华南环境科学研究所 广州 510655
    c长治学院 山西 长治 046000
  • 收稿日期:2019-11-29 接受日期:2020-04-17 出版日期:2020-06-01 发布日期:2020-06-08
  • 通讯作者: 周成勇
  • 基金资助:
    广东省国际合作项目(2018A050506045)、广东省自然科学基金(2018A030313226)、广东省基础与应用基础研究基金 (2020A1515010969)资助

Main Influencing Factors and Removal Mechanism of Phosphate Anions by Chitosan-Fe(III) Composite Gel Beads

ZHAO Bingbinga,DENG Dongyangb,CHEN Guihuab,SONG Qingmeib,FU Jianpingb,ZHANG Sukunb,ZHOU Chengyongac*(),JÜ Yongmingb   

  1. aSchool of Chemistry and Material Science,Shanxi Normal University,Linfen,Shanxi 041000,China
    bSouth China Institute of Environmental Sciences,Ministry of Ecology and Environment,Guangzhou 510655,China
    cChangzhi University,Changzhi,Shanxi 046000,China
  • Received:2019-11-29 Accepted:2020-04-17 Published:2020-06-01 Online:2020-06-08
  • Contact: ZHOU Chengyong
  • Supported by:
    Supported by the Guangdong International Cooperation Project(No.2018A050506045), the Guangdong Natural Science Foundation(No.2018A030313226), and the Guangdong Basic and Applied Basic Research Foundation(No.2020A1515010969)

摘要:

为改善当前环境水体中的磷污染现状,利用溶胶-滴定-真空冷冻干燥法制备了壳聚糖-铁(CS-Fe)复合凝胶球去除水中磷酸根。 对CS-Fe凝胶球的形貌结构进行了表征,研究了材料对磷酸根的吸附影响因素,并探索了反应机理。 结果表明,CS-Fe对磷酸根的吸附为自发、吸热、熵增过程;吸附过程符合拟一级动力学方程,吸附平衡时间为50 min;根据Langmuir模型计算最大吸附量为23.97 mg/g,脱附效率大于90%。 傅里叶红外光谱(FT-IR)、扫描电子显微镜-能量散射谱(SEM-EDS)、Zeta电势分析、X射线光电子能谱(XPS)等证明,CS-Fe形成利于磷酸根快速吸附的蜂窝状结构;吸附机理包含静电吸附和离子交换过程。 该吸附剂将金属化合物的吸附性能与壳聚糖大分子利于构建多孔材料的特点相结合,改善了吸附效果,球状材料更利于回收,避免二次污染,具有良好应用前景。

关键词: 壳聚糖凝胶球, 冷冻干燥, 静电吸附, 磷酸根

Abstract:

In order to improve the present situation of phosphorus pollution in environmental water, the chitosan iron (CS-Fe) composite gel beads were prepared by sol-titration-vacuum freeze drying method to remove phosphate from water. The morphology and structure of CS-Fe gel beads were characterized, and the factors affecting the adsorption of phosphate and the reaction mechanism were explored. The results show that the adsorption of phosphate by CS-Fe is a spontaneous, endothermic and entropy-increasing process, the adsorption process is in accordance with the pseudo first-order kinetic equation, the adsorption equilibrium time is 50 min, the maximum adsorption capacity calculated by Langmuir model is 23.97 mg/g, and the desorption efficiency is more than 90%. Fourier transform infrared (FT-IR), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), Zeta potential analysis and X-ray photoelectron spectroscopy show that CS-Fe forms a honeycomb structure which is favorable for the rapid adsorption of phosphate, and the adsorption mechanism includes electrostatic adsorption and ion exchange. The adsorbent combines the adsorption properties of metal compounds with the characteristics of chitosan macromolecule, which is conducive to the construction of porous materials and improvement of the adsorption effect. Gel beads materials are more conducive to recovery, avoid secondary pollution, and have potential applications.

Key words: chitosan gel beads, freeze-drying process, electrostatic adsorption, phosphate anions