应用化学 ›› 2018, Vol. 35 ›› Issue (11): 1301-1308.DOI: 10.11944/j.issn.1000-0518.2018.11.180013

• 研究论文 • 上一篇    下一篇

非冻结水对微球复合水凝胶机械性能的影响

梁学称ab,邓裕坤ab,裴小朋ac,翟侃侃ac,徐昆a*(),谭颖a*(),王丕新a   

  1. a中国科学院长春应用化学研究所,中国科学院生态环境高分子材料重点实验室 长春 130022
    b中国科学院大学 北京 100049
    c中国科学技术大学 合肥 230026
  • 收稿日期:2018-01-16 接受日期:2018-03-15 出版日期:2018-10-31 发布日期:2018-10-31
  • 通讯作者: 徐昆,谭颖
  • 基金资助:
    国家自然科学基金(51673191,21774124)吉林省科技发展计划项目(20160101306JC,201603101YY)资助

Effect of Non-freezing Water on the Mechanical Properties of Microspherical Composite Hydrogels

LIANG Xuechenab,DENG Yukunab,PEI Xiaopengac,ZHAI Kankanac,XU Kuna*(),TAN Yinga*(),WANG Pixina   

  1. aKey Laboratory of Polymer Ecomaterials,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022,China
    bUniversity of Chinese Academy of Sciences,Beijing 100049,China
    cUniversity of Science and Technology of China,Hefei 230026,China
  • Received:2018-01-16 Accepted:2018-03-15 Published:2018-10-31 Online:2018-10-31
  • Contact: XU Kun,TAN Ying
  • Supported by:
    Supported by the National Natural Science Foundation of China(No.51673191, No.21774124), the Jilin Province Science and Technology Development Project(No.20160101306JC, No.201603101YY)

摘要:

本文旨在用DSC的方法研究水凝胶结合水的能力与韧性的关系。 分别以甲基丙烯酸丁酯(BMA)或甲基丙烯酸六氟丁酯(HFBMA)和烯丙基胺为单体,制备了2种核壳纳米微球(BMA微球和HFBMA微球)。 再以其作为大分子引发剂和交联剂,制备了微球交联复合水凝胶(BMA-H凝胶和HFBMA-H凝胶)。 通过差示扫描量热仪(DSC)、傅里叶变换红外光谱仪(FTIR)和透射电子显微镜(TEM)等技术手段研究凝胶的结构和性能。 结果表明,HFBMA-H凝胶具有更好的机械性能,其拉伸强度和断裂伸长率分别可达280 kPa和3960%,远高于BMA-H凝胶(101 kPa,2700%)。 通过对2种复合凝胶体系内不同状态的水进行分析,发现HFBMA-H凝胶的非冻结水的质量分数明显高于BMA-H凝胶,这种非冻结水的增塑作用对于凝胶机械强度的提升具有重要影响。

关键词: 核壳微球, 复合水凝胶, 差示扫描量热法, 非冻结水

Abstract:

The aim of this paper is to study the relationship between the ability to combine water and the toughness of hydrogel by means of differential scanning calorimetry(DSC). N-butyl methacrylate(BMA) or 2,2,3,4,4,4-hexafluorobutyl methacrylate(HFBMA) and allylamine were chosen as monomers to synthesize core-shell nanospheres(named BMA nanosphere or HFBMA nanosphere). Then, the two nanospheres were used as macromolecular initiators and crosslinking agents to prepare nanospherical composite hydrogels(named BMA-H hydrogel or HFBMA-H hydrogel). DSC, Fourier transform infrared spectrometer(FTIR) and transmission electron microscopy(TEM) were used to characterize the structures and properties of hydrogels. The results of mechanical performance analysis indicate that the HFBMA-H hydrogel has better mechanical properties and its tensile strength and fracture elongation are up to 280 kPa and 3960%, respectively, which are much higher than those of BMA-H hydrogel(101 kPa, 2700%). DSC was used to investigate the state and proportion of water in composite hydrogels with different kinds of nanospheres. The results show that the non-freezing water content of HFBMA-H hydrogel is far higher than that of BMA-H hydrogel under the same water content, and the plasticizing effect of non-freezing water has an important effect on the mechanical strength of the hydrogel.

Key words: core-shell microgel, composite hydrogel, differential scanning calorimetry, non-freezing water