应用化学

• 研究论文 • 上一篇    下一篇

丙烯酸酯树脂对泰乐菌素的吸附

陆祎品,倪夏巍,江淼,冯桂荣,杨维本*   

  1. (南京师范大学化学与材料科学学院 南京 210097)
  • 收稿日期:2012-07-09 修回日期:2012-08-22 出版日期:2013-05-10 发布日期:2013-05-10
  • 通讯作者: 杨维本,副教授; Tel/Fax:025-85891707; E-mail:yangwb007@njnu.edu.cn; 研究方向:多孔吸附材料的合成与表征,新型有机污染物治理技术与理论
  • 基金资助:
    国家自然科学基金(51278253)资助项目;水利部公益性行业科研专项经费项目(201201018)

Adsorption of Tylosin by Acrylic Ester Resins

LU Yipin, NI Xiawei, JIANG Miao, FENG Guirong, YANG Weiben*   

  1. (College of Chemistry and Material Science,Nanjing Normal University,Nanjing 210097,China)
  • Received:2012-07-09 Revised:2012-08-22 Published:2013-05-10 Online:2013-05-10
  • Contact: Yang

摘要: 通过调节单体、交联剂和致孔剂的种类及数量合成了一系列具有不同孔结构的丙烯酸酯树脂,并从中选出具有典型吸附差异的2种树脂,拥有适合的孔分布结构的三羟甲基丙烷三甲基丙烯酸甲酯(TRIM)聚合树脂(1#)和含酰胺基的三烯丙基异氰尿酸酯(TAIC)与TRIM共聚树脂(5#),与商业化大孔丙烯酸酯树脂XAD-7作比较,研究了丙烯酸酯树脂对泰乐菌素的吸附行为和机理。结果表明,树脂1#表现出了对泰乐菌素有最高的吸附量。3种吸附剂的吸附量随溶液pH值的升高呈增加趋势。吸附剂的吸附能力随溶液NaCl离子浓度的增强而提高,而对CuCl2则呈相反趋势,这是因为疏水作用和孔径排斥效应的贡献。泰乐菌素在3种吸附剂上的吸附动力学均符合准二级动力学模型,吸附等温线符合Langmuir模型。升高温度可以使树脂吸附能力增强,可能是“溶剂替代”效应所致。

关键词: 丙烯酸酯树脂, 合成, 吸附, 泰乐菌素, 机理

Abstract: A series of acrylic ester resins with different pore structures was synthesized by varying the type and the amount of monomers, crosslinkers and poreforming agents. Among of them, resin 1# polymerized by trimethylolpropanetrimethacrylate(TRIM) with suitable pore distribution structure, resin 5# by TRIM and triallylisocyanurate(TAIC) with amide groups, and the commercial macroporous acrylic resin XAD-7 were used to study the adsorption behavior of tylosin and the mechanism on acrylic ester resins. The 1# resin exhibited a better adsorption property toward adsorbate. Similar patterns of pH-dependent adsorption showed that the adsorption amounts of tylosin increased with the increase pH values. The amounts of tylosin adsorbed increased in the presence of NaCl while decreased with CuCl2 because of the dominant contribution of hydrophobic effect and size-exclusion effect. The adsorption kinetics of the three adsorbents followed the pseudo-second order model, while the adsorption isotherm data fit well to the Langmuir models, indicating the coverage of the surface by a mono-molecular layer. The apparent temperature influence on the adsorption process demonstrated that the “solvent replacement” was the dominant mechanism.

Key words: acrylic ester resins, synthesis, adsorption, tylosin, mechanism

中图分类号: